If you have one of the marine versions of Perkins 3.152 with the paper oil filters inside a re-usable steel housing, then you will know what a messy business it is to do an oil change. A lot of oil can end up in the bilge!
Our oil filter conversion kit can help, as it uses a modern readily available 'spin on' canister type filter, that will lose a lot less oil when it is being changed. The filter hangs vertically below the aluminium filter head that is designed to bolt directly to the engine block fitting. To ensure that the filter assembly will not foul your engine bearer, note that the distance from the engine block mounting bolts to the bottom of the filter is 160 mm.
We are often asked whether the conversion is compatible with original oil cooler adapter plates. There is no easy answer as there are a number of versions, but if your adapter is a two piece assembly with a seperate filter head that has bolt centre dimensions of 6.7 cm, then our new filter head will mate up with your adapter.
- For engine codes:
- CD 3.152
- CE D3.152
- CJ 3.1522
- CM 3.1524
- Oil Filter head & gasket (aftermarket)
- Oil Filter (Perkins)
UK shipping is by 1st class post or courier, European and Worldwide shipping are available.