Perkins 4.108 & 4.108M

Perkins 4.108 DPA pump Mechanical Governor (Exchange)

We are pleased to offer fully reconditioned Perkins 4.108 injector pump. These pumps are disassembled, completely cleaned, inspected and all worn parts are reconditioned or replaced. The pump is then reassembled using all new seals and gaskets and...

Perkins 4.108 Injector Flange

Genuine Perkins 4.108 injector flange / clamp. Can be simply replaced if broken by removing the injector nozzle. UK shippig is by 1st class post, European and Worldwide shipping are available.

Perkins 4.108 Reconditioned Injector (Exchange)

Reconditioned Perkins 4.108 injector. These injectors are disassembled, all the parts are checked, new nozzles fitted, calibrated and tested. We also include in the kit a new copper sealing washer and banjo bolt washers. These injectors are correct for...

Perkins 4.108 Injector fixing studs

Genuine Perkins 4.108 injector fixing studs. Details: x1 50mm long x1 40mm long UK delivery is by 1st class Royal Mail or courier. European and Worldwide shipping is also available.  

Perkins 4.108 fuel pump push rod

Perkins 4.108 fuel pump push rod, made in Sheffield for parts4engines. (No longer available from Perkins). Details Length 93mm Diameter 9.5mm UK delivery is by Royal mail 1st class post or next working day courier, worldwide shipping is also...

Perkins 4.108 set of 4 Injector Nozzles

A set of four excellent injector nozzles for Perkins 4.108 engines that have the correct type of tip for all marine and automotive versions of this engine.The nozzle is the only wearing part of the injector and with new injectors becoming...

Perkins 4.108 Fuel Pre Filter kit

Aftermarket Perkins 4.108 high quality water separator (pre-filter) with re-usable internal gauze strainer and glass bowl. This universal sedimenter is very useful in the marine environment and is usually located on a bulkhead between the...

Perkins 4.108 Fuel Lift Pump kit

Perkins 4.108 diesel lift pump Kit - there are two types of lift pump used on these engines. 1. The 'two bolt' lift pump fits Perkins 4.108 early engines. 2. The 'four bolt' version fits Perkins 4.108 later engines. These are quality aftermarket pump...

Delphi Blanking Plug Kit for Filter Assembly

Aftermarket Delphi blanking plug kit for Filter Assembly includes: x2 Blanking plugs (1/2"UNF thread) x2 Blanking plug copper washers x1 Air vent bolt (M10 x1.5 Metric thread)  x1 Air vent washer UK, European and Worldwide shipping...

Delphi fuel filter assembly drain plug and washer

Delphi fuel filter assembly Drain Plug and sealing washer.  Thread diameter 7.5mm UK delivery is by 1st class Royal Mail or courier. European and worldwide delivery is available.

Perkins 4.108 Fuel Filter assembly

Replacement Perkins fuel filter assembly for Perkins 4.108 engines. This genuine Delphi quality part has the correct 1/2" UNF thread original fittings and also has the advantage of using the more readily available canister type fuel filter...

500 FG Turbine Fuel Filter Assembly

The 500FG is a quality aftermarket bulkhead mounted pre-filter. It features a turbine filtration system and is similar to the Racor 500FG.  It is designed to filter various contaminants such as water, dirt, rust, and algae and imporantly the top...

Perkins 4.108 Injector pump anti stall valve

Aftermarket Perkins 4.108 Injector pump Anti stall valve for use on injector pumps with an Hydraulic Governor. Includes: Anti stall valve fixing wire and tab UK, European and Worldwide shipping are available.

Perkins 4.108 and 4.107 Fuel return pipe

Aftermarket Perkins 4.108, 4.107 and 4.99  fuel return pipe; it returns fuel from the top of the injectors back to the filter housing. We now manufacture these, Perkins having ceased production. The kit includes: Anodised return...

Liqui Moly Diesel Purge 1Litre

Liqui Molly Diesel Purge additive is designed to remove deposits on injection nozzles and combustion chambers as well as boosting the cetane number. It also helps to eliminate engine running problems such as knocking when idling and ensures smooth...

Liqui Moly Anti- bacteria 'Diesel bug' additive 1L

Liqui Molly Anti-bacterial Diesel additive is a highly effective biocide designed to protect against bacteria, yeast and mold. Ideally suited for preventive use when engines  are decommissioned for long periods or are infrequently used such as...

Fuel filter element for Racor 500 FG

A good quality aftermarket '10 Micron' fuel filter kit suitable for the Racor 500 FG fuel and water separator assembly. Also used by Volvo Penta and equivalent to their 861014 filter element. Comes with: Filter element Two replacement seals (large...

Perkins 4.108 Gasket & Seal kit for injector pumps

A set of aftermarket gaskets and seals to overhaul your CAV DPA fuel pump on your Perkins 4.108. We stock both options for either the mechanically or hydraulically governed versions of this pump. Please select the correct version for your engine using...

Perkins 4.108 Fuel Pipe kit

A replacement aftermarket fuel line kit for your Perkins 4-108 with soft copper pipes cut over sized and supplied with a pipe cutter so you can achieve the perfect length. Also included are replacement solid brass sleeve nuts and olives. (Please...

Nautilus Marine 51mm Wet Exhaust Hose - Lloyds Approved

Lloyds Approved Nautilus Marine Exhaust Hose.  This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced by a steel helix wire.  Details: Salt water resistant, EPDM rubber Ozone and abrasion...

Stainless steel T-Bolt Clamp set

A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details: 304 Stainless steel Wide width provides a uniform clamping force Nyloc nut prevents...

Perkins 4.108 Glowplug Adapter

Quality aftermarket adapter sleeve for the glowplug on marine versions of the Perkins 4.108. These heat resistant plastic adapters are designed to electrically isolate the glowplug from the inlet manifold. UK delivery is by 1st class Royal Mail...

Perkins 4.108 Fuel Washers & Seal kit

Fuel washers and seal kit for Perkins 4.108 Series engines. Kit Includes: x4   Injector copper washers  x8   Fuel return pipe washers x6   Fuel filter assembly washers x10 Fuel pipe sealing...

Wynn's Injector Cleaner

Wynn's Injector cleaner for petrol and diesel engines, 325ml. Designed to neutralise the negative effects of water in fuel.  Details: Add to the fuel tank One bottle treats up to 60 liters Cleans the injectors of petrol and diesel...

Perkins 4.108 Injector pipes - for mechanically governed pump.

Genuine Perkins 4.108 Injector pipes to fit engines with a mechanically governed injector pump.  (See photos to view a mechanically governed pump)  Number 'One' cylinder is at the front of the engine and number 'Four' at the flywheel end...

Perkins 4.108 injector pipes for marine (Lowline) version

Genuine Perkins 4.108 Injector pipes to fit the lowline marine engine version, with the following build codes: ED13630, ED13631, ED22111, ED22714, ED22716, ED22741, ED33189, ED33191, ED33192, ED33194, ED33210, ED33211, ED33212, ED33215, ED33218,...

Perkins 4.108 Glowplug Thermostart

Quality aftermarket Perkins 4.108 12v heater plug (thermostart). It can be supplied with either the 'spade' or alternative 'screw' type electrical connection. A burnt-out coil on your glowplug is often one of the main causes of poor cold weather...

Perkins 4.108 Glowplug

A quality aftermarket glowplug for Perkins 4.108 engines. Fits late type cylinder heads, where the glowplug is directly screwed into the cylinder head and not the inlet manifold. UK delivery is by 1st class Royal Mail or courier ...

Perkins 4.108 Water Inlet Connector

High quality aftermarket Perkins 4.108 coolant inlet connector. This is the short tube that is pressed into the block just below the alternator position. They are prone to corrosion so our replacements are a upgrade of the original part and are...

Perkins 4.108 Stop Solenoid

Replacement 12 Volt, 16 ohm stop solenoid that fits the later versions of Perkins 4.108 fitted with electrically operated stop solenoid that screws directly into the fuel injection pump. This is a quality aftermarket part made by 'Flag' in...

Perkins 4.108 Breather Hose kit

Quality aftermarket 4.108 'breather hose' kit replaces the right angle hose located between the rocker cover and the inlet cowl on all factory marinised versions of these engines, which were fitted with a 'mushroom' type inlet manifold cowl. Our...

Perkins 4.108 Water pump Back Plate

High quality aftermarket Perkins 4.108 Water pump back plate fitted between the water pump and the engine block. Two options are available: Mild steel or Stainless steel.  UK mainland delivery is by Royal Mail or courier. European...

Perkins 4.108 Water Pump kit

Quality aftermarket Perkins 4.108 Water pumps manufactured specifically for us and to our high quality requirements. They are available with either the standard pulley for a 12 mm (7/16") wide belt, or the pulley for a wider 13 mm (1/2") belt...

Perkins 4.108M Coolant Hose Replacement kit

Quality aftermarket Perkins 4.108M Lowline (Marine version) coolant hose replacement kit, contains 11 hoses with hose clip option: transfer pipe to block inlet transfer pipe to oil cooler raw water transfer pipe to heat exchanger heat exchanger to...

Perkins 4.108 Stainless steel exhaust outlet elbow

We are now pleased to offer a Perkins 4.108 Exhaust outlet elbow kit, manufactured from 316 Stainless steel. This is a superbly engineered aftermarket universal outlet manufactured exclusively for parts4engines. This exhaust outlet provides a...

Perkins 4.108 Exhaust elbow hose connector kit. (Bowman)

Quality aftermarket Perkins 4.108 exhaust elbow hose connector kit. Included are all the parts required to connect the Bowman heat exchanger end cap to the inlet connector on the exhaust elbow. (see photos) x1 Brass Hose connector x3 40mm Stainless...

Perkins 4.108 Early coolant hose set (for front mounted exchanger)

 Quality aftermarket Perkins 4.108M (Marine version to fit front mounted heat exchanger) coolant hose replacement kit, contains 5 hoses with stainless steel hose clip option. Kit includes: header tank to exhaust manifold raw water pump to header...

Perkins 4.108 Exhaust Outlet Gasket

Quality aftermarket Perkins 4.108 Exhaust Outlet Gasket UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

Perkins 4.108 exhaust elbow water inlet kit (Stainless steel)

We can now offer an upgraded exhaust elbow connector for Perkins 4.108 marine engines.   With time the original cast iron part will fail due to corrosion, resulting in a restriction of the internal diameter of the connector and eventual...

Perkins 4.108M heat exchanger end caps

A pair of high quality aftermarket end caps for the later versions of the Perkins 4108M marine engine fitted with 'Bowman' type heat exchanger. These are the 'rubber boot' end caps that fit on either end of the exhaust mounted heat exchanger. Standard...

Perkins 4.108 Bowman heat exchanger filler neck assembly

A genuine Bowman Filler neck assembly for a Bowman type heat exchanger as fitted on later versions of the  Perkins 4.108 engine. Thread size 1 1/4  BSPT Thread diameter 42mm  (1.65") If you are also replacing the filler cap this...

Perkins 4.108 Water Temperature Sender

Good quality aftermarket water temperature sender that fits the majority of early Perkins 4.107 engines. Details: Spade type electrical connection Suitable for 12v or 24v systems Supplied with a sealing washer This will not fit directly...

Perkins 4.108 Bowman Heat Exchanger

Genuine Bowman combined exhaust manifold and heat exchanger that fits Perkins 4.108. This is a high quality original equipment part as supplied by Perkins in their later factory marinised versions and known as the 'Bowman' heat exchanger. It comes as...

Perkins 4.108 Bowman Exhaust Outlet kit

A Perkins 4.108 Exhaust Outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details: Exhaust pipe outer diameter 51 mm Water feed pipe diameter 32 mm   4 bolt pattern...

Perkins 4.108 Heat Exchanger & Oil Cooler Seal Kits

A set of replacement heat exchanger and oil cooler seals for Perkins 4.108 'lowline' engines. These are high quality nitrile rubber seals, manufactured to the correct elasticity (shore) for this marine application. Early or late kit...

Perkins 4.108 Drain Tap

Coolant drain tap for this Perkins 4.108 engine. This is a quality aftermarket part and is fully machined from solid brass. These drain taps have tapered threads and fit all versions of these engines. Often used on automotive/industrial versions...

Perkins 4.108 Temperature Sender Adapter

Aftermarket Perkins 4.108 Temperature sender adapter; thread size 1/2" to 3/8"NPT UK shipping is by 1st class post, European and Worldwide shipping are available

Perkins 4.108 Header Tank Cap

Perkins manufactured three marinised versions of Perkins 4.108 engines over the years, each with different options for the header tank used. See photos for height dimensions.  'Early' engines have the combined header tank/heat exchanger at the...

Perkins 4.108 Thermostat kit

Aftermarket Perkins 4.108 thermostat kit with the correct 82oC opening temperature for automotive and industrial applications. For marine applications, Perkins specify a 75oC thermostat and we can supply this alternative. Just select the correct...

Perkins 4.108 Thermostat Housing kit

A quality aftermarket aluminium thermostat housing to fit Perkins 4.108 marine engines. Kit includes: Thermostat housing Housing gasket Free 5ml Hylomar gasket sealant available with UK orders To fit a hose with a 30mm internal diameter. UK,...

Perkins 4.108 Raw Water Pump Alignment Tool

Perkins 4.108 Raw water pump alignment tool, used to centralise the adaptor plate to ensure reduced wear on the drive shaft components and as specified in the Perkins workshop manual. UK delivery is by 1st class Royal Mail. European and Worldwide...

Perkins 4.108 Raw Water Pump Hose Tails pair

Quality aftermarket Perkins 4.108 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.