Perkins 4.108 & 4.108M

Raw water pump cover plate gasket set

A set of five quality aftermarket raw water pump cover plate gaskets.   Outside diameter 76mm Equivalent to Pekins part number 0490785 Equivalent to Jabsco part number  3298-0000 Equivalent to Volvo part...

MPM Propeller Shaft Grease

MPM propeller shaft grease is specially developed for marine applications. The grease has a very high resistance to water washout and is therefore particularly suitable for use in stern glands. This grease is also suitable for: Lubricating rudder and...

Perkins 4.108 raw water pump mounting plate gasket kit

High quality aftermarket Perkins 4.108 raw water pump mounting gaskets, to fit a 'Jabsco' raw water pump. Kit contains: x1 Pump to mounting plate gasket x1 Inner mounting ring to timing cover gasket x1 Timing cover to mounting plate gasket  x1...

Perkins 4.108 Raw Water Pump

Genuine Jabsco bronze sea water pump as fitted to all Perkins 'UK factory marinised' versions of the Perkins 4.108 engine. The pump is engine driven from the front timing gear cover and is a high quality original equipment part with 3/4"...

Perkins 4.108 raw water pump end cover kit

Quality aftermarket Perkins 4.108 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our overhaul kit fits all versions of the...

Perkins 4.108 raw water pump Impellers & Service kits

Quality aftermarket 'standard impeller kits' and 'raw water pump service kits' for the factory marinised version of Perkins 4.108 fitted with the bronze engine driven  'Jabsco' raw water pump. Our impellers are excellent quality 12...

Perkins 4.108 Jabsco raw water pump drive shaft coupling

High quality aftermarket Perkins 4.108 Jabsco raw water pump drive shaft coupling UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

Perkins 4.108 Jabsco Raw Water Pump Mounting kit

Quality aftermarket Perkins 4.108 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these engines via the timing cover.  Kit comprises: Inner fixing ring Outer mounting adaptor...

Perkins 4.108 Jabsco raw water pump drive

Perkins 4.108 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

Perkins raw water pump screws

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare set as they can often fall into the bilge! Suitable for the following Perkins engine versions: 4...

Rydlyme Marine descaler

Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...

Perkins 4.108 High Water Temperature Alarm

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.108, supplied with a high temperature switch. Ideal for marine use, as it gives an audible alarm in the event of high engine temperature. We supply this with male and female lucar...

Perkins 4.108 Low Oil Pressure Alarm

Aftermarket Low oil pressure alarm for Perkins 4.108 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure switch (thread size: 1/8 NPTF). Ideal for marine use, as it gives an audible alarm in the event of...

Perkins 4.108 Lowline heat exchanger Anode

A pair of (pencil style) Perkins 4.108 Lowline heat exchanger Anodes.  This Anode is located inside a blanking plug (see photo). Quality product from Technoseal X2 Anodes (pair) Ø 6.35mm Length 25mm UK delivery is by 1st class Royal...

Lucas 12v heavy duty relay

A Lucas heavy duty relay with detachable mounting bracket. These high quality waterproof relays were extensively used on Perkins marine wiring looms for glowplug and starter systems and are easily identified by their green plastic casing. Well worth...

Perkins 4.108 Alternator Belt

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.108 engines. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts. There are two...

JB Marine Weld Syringe

JB MarineWeld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar surfaces. For metal, aluminum, plastic composites, fiberglass, wood and others. 1:1 mixing ratio that...

Alternator 'Euro connector' plug kit

Aftermarket alternator wiring connector kit, commonly known as a 'euro connector'. Fits many standard 3 pin alternators. UK delivery is by 1st class Royal Mail or courier.  European and Worldwide delivery is available.

Perkins 4.108 Alternator 12V, 65+ Amp

Quality aftermarket 12 volt 65+ amp, 'high output' alternators fit all versions (including marine) of Perkins 4.108 engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can...

Perkins 4.108 Alternator 12V 45 Amp

Quality aftermarket Perkins 4.108 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can be seen from the...

Perkins 4.108 Alternator high output isolated earth 90A

High quality aftermarket  12 volt 90 amp high output alternators fit all versions Perkins 4.108 (including marine) of these engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting...

Perkins 4.108 Lowline Alternator

High quality aftermarket This 12 volt Perkins alternator fits the Perkins 4.108 'lowline' marine engine. The adjuster arm securing bolt is at a 180 degree angle to the mounting arms as can be seen from the photos. The alternator takes the earth (-)...

JB Marine Weld

JB Marine Weld is a specially formulated two-part steel reinforced epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces. For aluminum, metal, plastic composites, fiberglass, wood, ceramic and...

Perkins 4.108, 12v 150A Insulated earth starter solenoid

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth connection and consequently it is ideal for marine use to help avoid galvanic corrosion...

Perkins 4.108 Starter Solenoid 100 Amp

Quality aftermarket starter solenoids from Prestolite suitable for Perkins 4.108 inertia type starter motors fitted to automotive' or a marine engines. Our automotive version is suitable for applications where the base of...

70 Amp Alternator (Insulated earth)

Quality aftermarket 14 Volt 70 Amp Insulated return alternator 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can be seen from the photos and diagram. (This is a right...

12v Heavy duty relay (100 amp)

High performance electrical relay with mounting bracket suitable for high current switching. Details: 12v 100 amp  Dimensions 4.5cm x 4.5cm x 7cm Connections 2x 6mm screw terminals and 2 lucar terminals UK delivery is by1st class post...

Perkins 4.108 Ignition switch

Aftermarket starter/ignition switch for Perkins 4.108 engines, including marine versions. We offer two switch options, which have either 4 pin or 6 pin electrical connections and differing key positions, as can be seen...

Liqui Moly Marine Anti-Limescale 5L

High quality Liqui Moly Marine Anti-Limescale 5L. This is a water based solution with inorganic acid to remove limescale deposits within engine cooling systems  Liqui Moly aim to produce 'the best but not always not the cheapest' products...

Liqui Moly Marine Antifreeze 5L

High quality Liqui Moly Marine Antifreeze 5L. This is a Glycerin and water based product offering excellent winter protection.  Liqui Moly aim to produce 'the best but not the cheapest' products available.  Product details: Biologically...

Siderise Marine sound proofing

After extensive research we are pleased to offer an exceptional quality 32mm Siderise acoustic panel.  This is a composite panel specifically designed for marine use and is ideal for suppressing noise from engine compartments or bulkheads...

Enfield / Sonic Flexible shaft Coupling

A quality flexible drive shaft coupling for connecting the gearbox output flange to the propeller drive flange. Manufactured by R & D Marine this coupling fits 4.99, 4.107 and 4.108 engines fitted with a Enfield leg. Gearbox...

Stainless Steel hose clips

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Band diameter given in the options above is the 'maximum'. UK delivery is by 1st class Royal Mail,...

MPM Antifreeze Concentrate 5 litre

Standard ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and diesel engines. This antifreeze should be further diluted before use with water in the recommended ratio. Freezing...

Antifreeze & Coolant 2 Litre

A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overheating. Suitable for use in all types of vehicle requiring an MEG coolant. Suitable for Ferrous and...

Perkins Digital Tachometer & Hour Meter Gauge

This high quality waterproof tachometer and hour meter has been manufactured solely for Parts4engines and is designed to operate in the harsh marine environment. It takes its rpm 'signal' from the 'W' terminal on many makes of alternator and is...

Water Temperature Gauge and Sender

Universal 12V to 24V waterproof Temperature gauge with sender. This high quality product has been manufactured solely for Parts4engines and is designed to operate in the harsh marine environment. Product details: 12 to 24...

Universal Voltmeter

Quality aftermarket 12v battery voltmeter.  This is a waterproof gauge, ideal for use in the marine environment. Specifications are: Measuring range 10 to 15 Volts (full deflection) Face colour black, with black...

Perkins 4.108 Oil pressure sender

Aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins 4.108 with 2 options available: Earth return sender - uses the outer casing to provide an earth return circuit. Isolated earth sender - Usually used in the marine environment,...

Perkins 4.108 Oil Pressure Gauge

Perkins 4.108 electrically operated 12V oil pressure gauge and sender. This is a  quality waterproof gauge, ideal for use in the marine environment. Specifications: Measuring range 0-80 PSI Fully waterproof Manufactured with a plastic...

Blue Sea 120A Split Charge Relay & Switch

High quality Blue Water 12 or 24v automatic battery charging kit designed in the USA. The kit includes two products, a Dual Circuit Plus battery switch and an Automatic Charging Relay. These components simplify switching and automate charging,...

Blue Sea 120A Split Charge Relay

High quality SI-ACR Blue Water 12 or 24v automatic battery charging relay designed in the USA. Automatically combines batteries during charging, isolates batteries when discharging and when starting engines.  (More robust than the...

Heavy duty propeller shaft zinc anode

A quality aftermarket heavy duty zinc shaft anode.  Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market. This shaft anode...

Liqui Moly Battery Clamp Grease 50g

Liqui Molly Battery Clamp Grease. A Specially formulated grease that protects battery terminals and electrical contacts from corrosion and oxidation. It  also prevents acid damage, and has good compatibility with plastics and prevents current...

Liqui Moly Marine Universal Cleaner k 1L

Liqui Molly Marine Universal Cleaner, a low-foaming, biodegradable boat cleaner with outstanding cleaning performance. Dissolves even stubborn accumulated dirt such as dark drain tracks after lengthy storage, bird droppings, abrasion marks from shoes and...

Liqui Moly Marine Diesel Protect 500 ml

Liqui Molly Marine Diesel Protect, a solution for bacteria, yeast and mold, suitable for reliable long-term preservation. Maintains and protects the entire fuel system thanks to cleaners and corrosion protection. Liqui Molly aim to produce 'the best...

Liqui Moly Marine Grease 250g

Liqui Molly Marine Grease, is a long-lasting heavy-duty grease that reduces friction and wear. It has excellent aging and shear stability.  Liqui Molly aim to produce 'the best but not always not the cheapest' products available...

Liqui Moly Marine Multi-Spray 400 ml

Liqui Molly Marine Multi-spray aerosol, specifically designed for marine purposes to protect and preserve. Keeps moving parts moving and protects against corrosion and oxidation. Drives out moisture and protects the vessel's entire electrical system...

Engine Paint Primer

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...

Perkins Engine Paint

A range of quality aftermarket enamel engine paints which are an accurate match for the original Perkins paints and are manufactured in the UK solely for Parts4Engines. Perkins have used a wide range of paint colours over the years and the explanatory...