Product Description
Quality Perkins 4.108 Oil filter conversion kit. If you have one of the early marine versions of these engines with the paper oil filters inside a re-useable steel housing, then you will know what a messy business it is to do an oil change. A lot of oil can end up in the bilge!
Our oil filter conversion kit for Perkins 4.108 can help, as it uses a modern readily available 'spin on' canister type filter, that will lose a lot less oil when it is being changed. The filter hangs vertically below the aluminium filter head that is designed to bolt directly to the engine block fitting. To ensure that the filter assembly will not foul your engine bearer, note that the distance from the engine block mounting bolts to the bottom of the filter is 160 mm.
We are often asked whether the conversion is compatible with original oil cooler adapter plates. There is no easy answer as there are a number of versions, but if your adapter is a two piece assembly with a seperate filter head that has bolt centre dimensions of 6.7 cm, then our new filter head will mate up with your adapter.
Kit includes:
- Oil Filter head & gasket (aftermarket)
- Oil Filter (Genuine)
- Free 5ml Hylomar gasket sealant available with UK orders
UK, European and Worldwide shipping available.
Product Videos
Custom Field
Product Reviews
2 Reviews Hide Reviews Show Reviews
-
Oil filter conversion kit
Easy to fit
-
Perkins 4.108M oil filter conversion
This product worked very well. You will need to buy 2 x 7/16in UNF bolts x 1-1/4in long if you intend to bolt this straight to the engine block. Note that I did not have clearance for the Perkins oil filter so I used a slightly shorter one. Just make sure filter has a 3/4in-16 thread and a diameter of 93mm, with NRV and same bypass valve setting as the Perkins one.