Perkins 4.99 Oil Filter Conversion kit. If you have one of the early marine versions of these engines with the paper oil filters inside a re-usable steel housing, then you will know what a messy business it is to do an oil change. A lot of oil can end up in the bilge!
Our oil filter conversion kit for Perkins 4.99 can help, as it uses a modern readily available 'spin on' canister type filter, that will lose a lot less oil when it is being changed. The filter hangs vertically below the aluminium filter head that is designed to bolt directly to the engine block fitting. To ensure that the filter assembly will not foul your engine bearer, note that the distance from the engine block mounting bolts to the bottom of the filter is 160 mm.
We are often asked whether the conversion is compatible with original oil cooler adapter plates. There is no easy answer as there are a number of versions, but if your adapter is a two piece assembly with a seperate filter head that has bolt centre dimensions of 6.7 cm, then our new filter head will mate up with your adapter.
- Oil Filter head & gasket (aftermarket)
- Oil Filter Genuine Perkins
UK delivery is by 1st class Royal Mail or courier. European and Worldwide shipping is also available.
9 Reviews Hide Reviews Show Reviews
Fit perfect I have an old 1969 Perkins 4.236 and wasn't sure it would fit so I purchased it and it fit perfect. Shipped over night bur was received the 3 day US customs. Jerry Schmitt
Prefect and great service arrived next morning ! Thanks very much
Enable me to put the engine into the boat without major alteration. Great.
With limited room in which to work the complete original filter can & housing had to be removed when changing oil & filter. Fitting the conversion kit to the screw on cartridge type filter made oil changes so much easier and cleaner to complete. very satisfied with the outcome.
Fast delivery of item well satisfied with service good company to deal with
Simple to change and made a huge difference to the ease of filter changes. Spin on filters are slightly more expensive but so much cleaner to use, do not know why I waited so long.
The MF130 has a 4.107. The conversion kit just about make the oil filter hit the added frame of the tractor. Tilting the filter head to the rear as much as holes/bolts allows helps. Perhaps I'll use a more narrow filter next time. And you need a new shorter bolt as the long one in the old filter head is, well, too long. Perhaps that bolt should be included in the kit?
Thanks for yet another prompt shipment! Great to have you guys to keep my old MF130 going.
Excellent service from Parts4engines, simple to fit, makes oil changes simple and relatively clean. Buy one, you won't be disappointed.
Have been looking for a suitable, affordable conversion for the oil filter on my boat. Changing the filter was a chore to say the least because of the positioning of the filter in the most awkward of places. After ringing to enquire about the product I spoke to someone who assured me that this product would be exactly what I wanted. Purchased the conversion and it was delivered very quickly. Everything I needed to do the job was included. Changed the filter head and had it up and running within the hour. How so much easier changing the filter has become. Many thanks for a very speedy service, excellent product information and assistance , and an affordable conversion. Highly recommended