Perkins 4.99

Perkins 4.99 Water pump Back Plate

High quality aftermarket Perkins 4.108 Water pump back plate fitted between the water pump and the engine block. Two options are available: Mild steel Stainless steel.  UK mainland delivery is by Royal Mail or courier. European and...

Perkins 4.99 Water Pump kit

Aftermarket Perkins 4.99 Water pumps manufactured specifically for us and to our high quality requirements. They are available with either the standard pulley for a 12 mm (7/16") wide belt, or the pulley for a wider 13mm (1/2") belt often found on...

Perkins 4.99 Exhaust Outlet Gasket

Quality aftermarket Exhaust elbow Outlet Gasket for Perkins 4.99 marine engines.  Available for 4 or 5 hole outlets.  UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is available.

Perkins 4.99 exhaust elbow water connector kit

A quality aftermarket exhaust elbow connector for Perkins 4.99 engines.  (Used in conjunction with Bowman style heat exchanges) Kit includes: Connector x2 studs x2 nuts x2 spring washers Gasket Gasket sealant UK delivery is by 1st class...

Perkins 4.99 Bowman Exhaust Outlet kit

A Perkins 4.99 Exhaust Outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details: Exhaust pipe outer diameter 51 mm Water feed pipe diameter 32 mm   4 bolt pattern with...

Perkins 4.99 Bowman Heat Exchanger

Combined Bowman exhaust manifold and heat exchanger that fits Perkins 4.99. This is a high quality original equipment part as supplied by Perkins in their later factory marinised versions and known as the 'Bowman' heat exchanger. Direct cooling of...

Perkins 4.99 Water Temperature Sender

Perkins 4.99 Water temperature sender, an aftermarket replacement to fit the majority of these engines. Spade type electrical connection For 12v or 24v systems Supplied with aluminium sealing washer. Choose single connection for earth return...

Perkins 4.99 Drain Tap

Coolant drain tap for this Perkins 4.99 engine. This is a quality aftermarket part and is fully machined from solid brass. These drain taps have tapered threads and fit all versions of these engines. Often used on automotive/industrial...

Perkins 4.99 Temperature Sender Adapter

Aftermarket Perkins 4.99 Temperature sender adapter; thread size 1/2" to 3/8"NPT.  UK shipping is by 1st class post, European and Worldwide shipping are available

Perkins 4.99 Thermostat kit

A quality aftermarket thermostat kit for Perkins 4.99 engines. it has the correct 82oC opening temperature for automotive and industrial applications. For marine applications, Perkins specify a 75oC thermostat and we can supply this...

Perkins 4.99 Thermostat Housing kit

A quality aftermarket aluminium thermostat housing kit for Perkins 4.99 marine engines. Kit includes: Thermostat housing  Housing gasket Hylomar sealant To fit a hose with a 30mm internal diameter. UK delivery is by 1st class...

Perkins 4.99 Raw Water Pump Alignment Tool

Perkins 4.99 Raw water pump alignment tool, used to centralise the adaptor plate to ensure reduced wear on the drive shaft components and as specified in the Perkins workshop manual. UK delivery is by 1st class Royal Mail. European and Worldwide...

Raw water pump cover plate gasket set

A set of five quality aftermarket raw water pump cover plate gaskets.   Outside diameter 76mm Equivalent to Pekins part number 0490785 Equivalent to Jabsco part number  3298-0000 Equivalent to Volvo part...

Perkins 4.99 raw water pump end cover kit

Quality aftermarket Perkins 4.99 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our overhaul kit fits all versions of the...

Perkins 4.99 Raw Water Pump

Genuine Jabsco bronze sea water pump as fitted to all Perkins 'UK factory marinised' versions of the Perkins 4.99 engine. The pump is engine driven from the front timing gear cover and is a high quality original equipment part with...

Perkins 4.99 Jabsco Raw Water Pump Mounting Kit

High quality aftermarket Perkins 4.99 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these engines via the timing cover.  Kit comprises: Inner fixing ring Outer mounting plate x3...

Perkins 4.99 Jabsco raw water pump drive

Quality aftermarket Perkins 4.99 Jabsco raw water pump drive. This part is only suitable for Jabsco raw water pump. UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

Perkins 4.99 Jabsco raw water pump drive shaft coupling

High quality aftermarket Perkins 4.99 Jabsco raw water pump drive shaft coupling. UK delivery is by 1st class Royal Mail or courier.  European and Worldwide delivery is available.

Perkins raw water pump screws

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare set as they can often fall into the bilge! Suitable for the following Perkins engine versions: 4...

Perkins 4.99 raw water pump Impellers & Service kits

High quality aftermarket Replacement 'standard impeller kits' and 'raw water pump service kits' for the factory marinised version of Perkins 4.99 fitted with the bronze engine driven raw water pump. Our impellers are excellent quality 12 blade...

Perkins 4.99 High Water Temperature Alarm

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.99, supplied with a high temperature switch. Ideal for marine use, as it gives an audible alarm in the event of high engine temperature. We supply this with male and female lucar...

Perkins 4.99 Low Oil Pressure Alarm

Low oil pressure alarm for Perkins 4.99 is a quality aftermarket bulkhead mounted warning alarm, to be used in conjunction with an oil pressure switch (thread size: 1/8 NPTF). Ideal for marine use, as it gives an audible alarm in the event of engine...

Perkins 4.99 Alternator Belt

Excellent quality aftermarket alternator and water pump drive belts which are the correct fitment for standard Perkins 4.99 engines. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts. There are two widths of...

Alternator 'Euro connector' plug kit

Aftermarket alternator wiring connector kit, commonly known as a 'euro connector'. Fits many standard 3 pin alternators. UK delivery is by 1st class Royal Mail or courier.  European and Worldwide delivery is available.

Perkins 4.99 Alternator 12V 65 + Amp

These quality aftermarket 12 volt 65 amp alternators fit all versions, including the marine version of Perkins 4.99 engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting...

Perkins 4.99 Alternator high output isolated earth 90A

Quality aftermarket 12 volt 90 amp high output alternators fit all versions Perkins 4.99 (including marine) of these engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can...

Perkins 4.99 Alternator 12V 45 Amp

Quality aftermarket Perkins 4.99 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can be seen from the...

Perkins 4.99 Starter Solenoid 100 Amp

Quality aftermarket starter solenoids from Prestolite suitable for Perkins 4.99 inertia type starter motors fitted to automotive' or a marine engines. Our automotive version is suitable for applications where the base of the unit is 'grounded' to...

70 Amp Alternator (Insulated earth)

Quality aftermarket 14 Volt 70 Amp Insulated return alternator 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can be seen from the photos and diagram. (This is a right...

12v Heavy duty relay (100 amp)

High performance electrical relay with mounting bracket suitable for high current switching. Details: 12v 100 amp  Dimensions 4.5cm x 4.5cm x 7cm Connections 2x 6mm screw terminals and 2 lucar terminals UK delivery is by1st class post...

Perkins 4.99 Ignition switch

Aftermarket starter/ignition  switch for Perkins 4.99 engines, we offer two switch options, which have either 4 pin or 6 pin electrical connections and differing key positions, as can be seen from the photos...

Enfield / Sonic Flexible shaft Coupling

A quality flexible drive shaft coupling for connecting the gearbox output flange to the propeller drive flange. Manufactured by R & D Marine this coupling fits 4.99, 4.107 and 4.108 engines fitted with a Enfield leg. Gearbox...

Stainless Steel hose clips

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Band diameter given in the options above is the 'maximum'. UK delivery is by 1st class Royal Mail,...

MPM Antifreeze Concentrate 5 litre

Standard ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and diesel engines. This antifreeze should be further diluted before use with water in the recommended ratio. Freezing...

Antifreeze & Coolant 2 Litre

A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overheating. Suitable for use in all types of vehicle requiring an MEG coolant. Suitable for Ferrous and...

Water Temperature Gauge and Sender

Universal 12V to 24V waterproof Temperature gauge with sender. This high quality product has been manufactured solely for Parts4engines and is designed to operate in the harsh marine environment. Product details: 12 to 24...

Universal Voltmeter

Quality aftermarket 12v battery voltmeter.  This is a waterproof gauge, ideal for use in the marine environment. Specifications are: Measuring range 10 to 15 Volts (full deflection) Face colour black, with black...

Perkins 4.99 Oil pressure sender

Quality aftermarket 12 to 24v oil pressure sender for Perkins 4.99 with 2 options available: Earth return sender - uses the outer casing to provide an earth return circuit. Isolated earth sender - Usually used in the marine environment, sender has an...

Perkins 4.99 Oil Pressure Gauge

Aftermarket Perkins 4.99 electrically operated 12V oil pressure gauge and sender.  This is a quality waterproof gauge, ideal for use in the marine environment. Specifications: Measuring range 0-80 PSI Fully...

Liqui Moly Battery Clamp Grease 50g

Liqui Molly Battery Clamp Grease. A Specially formulated grease that protects battery terminals and electrical contacts from corrosion and oxidation. It  also prevents acid damage, and has good compatibility with plastics and prevents current...

Engine Paint Primer

Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...

Perkins Engine Paint

A range of quality aftermarket enamel engine paints which are an accurate match for the original Perkins paints and are manufactured in the UK solely for Parts4Engines. Perkins have used a wide range of paint colours over the years and the explanatory...