Created with Sketch. Created with Sketch.

Shop by Category

Perkins M90 parts


  • Perkins 4.236 M heat exchanger end caps Perkins 4.236 M heat exchanger end caps

    Perkins 4.236 M heat exchanger end caps

    Aftermarket pair of end caps for the later versions of the Perkins 4.236 M marine engine fitted with 'Bowman' type heat exchanger. These are the 'rubber boot' end caps that fit on either end of the exhaust mounted heat exchanger. Standard engine...

    £26.00 - £36.00
    Choose Options
  • Perkins M90 Raw water pump impeller kit from

    Perkins M90 Raw water pump impeller kit

    Quality aftermarket replacement 'standard impeller kits' and 'raw water pump service kits' for all factory marinised versions Perkins M90 fitted with the bronze engine driven raw water pump. Our impellers are excellent quality 12 blade neoprene rubber...

    Add to Cart
  • Perkins raw water pump screws

    Perkins raw water pump screws

    A set of 6 aftermarket set screws that fit the end cover of the bronze Jabsco raw water pump. Manufactured by Parts4engines from solid brass and to the correct OE specification. Well worth keeping a spare set as they can often fall into the bilge! UK...

    Add to Cart
  • Rydlyme Biodegradable Descaler - Rydlyme Biodegradable Descaler -

    Rydlyme Marine descaler

    Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...

    £11.00 - £49.00
    Choose Options
  • Perkins M90 Starter Motor Perkins M90 Starters Motor 12V 1.8kW

    Perkins M90 Starter Motor

    Quality aftermarket Perkins M90 starter motors 12V earth return, fitted on all versions (including marine). Set up for a 'three lug' mounted starter. Contact us if you need more info about all of the options we list. *Check also the images for the...

    £144.00 - £189.00
    Choose Options
  • Perkins 4.236 Starter solenoid from Perkins 4.236 Starter solenoid rear view from

    Perkins M90 Starter solenoid

    Quality aftermarket Perkins M90 12V, 150 Amp starter solenoid. This is a quality aftermarket product with an insulated earth return, ideal for marine use. Specification: 12v, 150 Amp Intermittent load 300 Amp length 66mm Width 56mm OD 41.04...

    Add to Cart
  • Perkins M90 Low oil pressure alarm / buzzer from Perkins M90 Low oil pressure alarm / buzzer from

    Perkins M90 Low oil pressure alarm

    Aftermarket Low oil pressure alarm for Perkins M90 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure switch (thread size: 1/8 NPTF). Ideal for marine use, as it gives an audible alarm in the event of engine...

    £8.00 - £14.00
    Choose Options
  • SALE
    Perkins M90 Alternator belt from Perkins M90 Alternator 'Extra Long Life' belt from

    Perkins M90 Alternator belt

    Top quality aftermarket alternator and water pump belt which are the correct fitment for Perkins M90 engines. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts. We stock 4 different belt...

    £9.50 - £11.50
    Choose Options
  • Perkins M90 Ignition switch from 4 pin switch - Perkins M90 Ignition switch from

    Perkins M90 Ignition switch

    An aftermarket starter/ignition  switch for Perkins M90 engines,  We offer two switch options, which have either 4 pin or 6 pin electrical connections and differing key positions, as can be seen from the...

    Choose Options
  • Antifreeze & Coolant 2 Litre from

    Antifreeze & Coolant 2 Litre

    A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overheating. Suitable for use in all types of vehicle requiring an MEG coolant. Suitable for Ferrous and...

    Choose Options
  • Stainless Steel hose clips

    Stainless Steel hose clips

    Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Band diameter given in the options above is the 'maximum'. UK delivery is by 1st class Royal Mail,...

    £0.85 - £1.35
    Choose Options
  • MPM Antifreeze, from

    MPM Antifreeze Concentrate 5 litre

    Standard antifreeze from MPM, can be used throughout the whole year in the cooling systems of petrol and diesel engines. This antifreeze should be further diluted before use with water in the recommended ratio. Freezing point 60% diluted: -26 °C...

    Choose Options
  • T-Bolt Clamp set, from

    Stainless steel T-Bolt Clamp set

    A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details: 304 Stainless steel Wide width provides a uniform clamping force Nyloc nut prevents...

    £4.00 - £5.00
    Choose Options
  • Perkins M90 oil pressure senders from Perkins M90 oil pressure senders from

    Perkins M90 Oil pressure sender

    Quality aftermarket 12 to 24v Isolated earth oil pressure sender for Perkins M90 with 2 options available: Earth return sender - uses the outer casing to provide an earth return circuit. Isolated earth sender - Usually used in the marine...

    Choose Options
  • Shaft Anode UK type, from

    Heavy duty propeller shaft zinc anode

    A quality aftermarket heavy duty zinc shaft anode.  Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market. This shaft anode...

    £19.00 - £28.00
    Choose Options
  • Perkins tachometer & hour meter - Perkins tachometer & hour meter -

    Perkins Digital Tachometer & Hour Meter

    A quality aftermarket universal water resistant tachometer and hour meter, ideal for use in the marine environment and manufactured exclusively for Parts4engines Ltd.  This tachometer can be configured to work in conjunction with alternators,...

    Add to Cart
  • Perkins Engine Paint primer from

    Engine Paint Primer

    Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...

    Choose Options
  • Perkins Engine Paint from

    Perkins Engine Paint

    Quality aftermarket engine enamel paint manufactured as a match for Perkins engine paints and manufactured solely for Parts4Engines. Marine Blue - extensively used by Perkins on early marine engines such as the 4.108 Dark Blue - used predominantly on...

    Choose Options