A comprehensive overhaul kit which includes the major components that you will need to overhaul your tired and smoking Perkins Prima M60 engine
This overhaul kit includes the following parts:
4 x pistons - these are the correct 3 ring pistons with...
Perkins Prima top gasket set, a very comprehensive set of quality gaskets and seals for the top end of your Perkins Prima M60
Cylinder head gasket - top quality and silicon lined
Laminated inlet/exhaust manifold gasket
Set of both...
Perkins Prima M60 bottom gasket set, a very comprehensive set of quality gaskets and seals for the bottom end of your Perkins M60. Set includes:
Oil pump gasket
Bell housing gasket
Exhaust outlet gaskets (marine)
Front and rear oil...
A quality set of standard size piston rings for your Perkins Prima M60. These ring sets fit all 3 ring pistons on all Prima engines.
Each set comprises
top compression ring - chrome-vanadium, parallel
second compression ring - cast, parallel
Perkins Prima M60 replacement head bolt set. These high quality, correctly tempered parts fit all versions of this engine, including normally aspirated and turbocharged marine versions. The set also includes with our data sheet with head bolt tightening...
A set of high quality replacement valves and spring sets, as fitted to Perkins Prima M60.
Inlet valves x 4
Exhaust valves x 4
These valves are manufactured for us and to our discerning standards. Valve springs are genuine OE replacements. UK...
Perkins Prima M60 Cam follower. A genuine quality Perkins replacement part to fit all versions of this engine.
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is available.
Perkins Prima M60 connecting rod bearings UK delivery is by next day courier. European and Worldwide shipping is also available.
Used Crankshaft for Perkins Prima M60
UK delivery is by courier. European and Worldwide shipping is also available.
Perkins Prima M60 cylinder head valve guide, this is a genuine Perkins replacement and fits all versions of this engines.
External diameter 12mm
UK delivery is by Royal mail 1st class post or next working day courier. European...
Replacement engine mounts for Perkins Prima M60 marine engines. Fitting the correct type of mount for the weight and use of your engine is crucial in not only maintaining structural safety, but also reducing to a minimum the transmission of...
Perkins Prima M60 Main bearings, available in the following sizes:
UK delivery is by next day courier. European and Worldwide shipping is also available.
A quality set of fuel and oil filters that fit Perkins Prima M60 engine. These are original OE filters manufactured by Perkins
A top quality timing belt for Perkins Prima M60 which is the correct fitment for all versions of this engine, including marine. These are heavy duty belts produced by 'Gates', the leading manufacturer of aftermarket belts.
The tensioner pulley and idler...
Top quality alternator belts which are the correct fitment for standard engines Perkins Prima M60. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts.
UK delivery is by 1st class Royal Mail. European and...
A quality replacement diesel lift pump for the Perkins Prima M60 marine engines. These pumps are very well engineered and excellent value.
Supplied with a gasket, x2 brass sleeve nuts, x2 rubber olives and a tube of Hylomar
UK delivery is by 1st class...
We now offer fully reconditioned Perkins Prima M60 injector pumps. Reconditioned pumps are disassembled, completely cleaned, inspected and all worn parts are reconditioned or replaced. The pump is then reassembled using all new seals and gaskets and then...
Made by Flag (Germany) this is very comprehensive quality set of gaskets and seals to overhaul your Perkins Prima M60 fuel injection fuel pump.
UK delivery is by 1st class Royal Mail. European and Worldwide shipping is also available.
A set of four nozzles manufactured by Delphi CAV or Bosch for Perkins Prima M60
The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively expensive, the alternative option of reconditioning your existing...
Delphi twin fuel filter assembly for Perkins Prima M60, ideal for increasing the filtering capacity to your injector pump. Typically fitted on the bulk head between the fuel supply and lift pump. The connections are 1/2" UNF thread original fittings and...
Replacement 12V stop solenoid that fits Perkins Prima M60 engines fitted with the electrically operated stop solenoid that screws directly into the fuel injection pump.
There are two types available:
'Pull type' - this standard version is energised...
A genuine OE replacement exhaust elbow connector for Perkins Prima M60 engines. Kit includes:
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
A genuine OE replacement Exhaust manifold outlet part for Perkins Prima M60 normally aspirated engines.
Supplied with a pair of gaskets.
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
Perkins Prima M60 exhaust outlet gasket, a quality UK hand cut gasket.
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is also available.
A quality, strong Stainless Steel worm drive clamp ideal for both the marine environment and industrial use.
Band width 12.5mm
UK delivery is by 1st class Royal Mail, European and Worldwide delivery is available.
Perkins Prima M60 Hose replacement kit. Hoses included are:
Raw water pump to heat exchanger
heat exchanger to thermostat
transfer pipe to exhaust elbow
water pump to thermostat housing
water pump to transfer pipe
Choose option to include...
Heat exchanger rubber tube stack seal for Perkins Prima M60, fits between the tube stack and the outer casting. Please note Perkins produced two different diameter tube stacks for use with this engine range. This seal is compatible with the 50...
A set of four quality glowplugs to fit Perkins Prima M60 engines. Easy to change and a great help to cold starting! UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
A pair of end caps for all marine versions of this Perkins Prima M60 engine. These are the 'rubber boot' end caps that fit on either end of the exhaust mounted heat exchanger.
The hoses are a genuine original part and are a high quality product...
Perkins Prima M60 (BA code - 504-2) water pump, a genuine Perkins OE water pump as fitted to industrial (not automotive) and all marine versions of this engine.
Please note, the pump surface in contact with the engine block is a machine finish and as...
This thermostat fits Perkins Prima M60 engine and has the correct 82oC opening temperature. Comes complete with a gasket and a tube of Hylomar non-setting and non-hardening sealant.
You might also be interested in our top gasket sets. See our...
Original part Perkins Prima M60 insulated earth temperature gauge sender for marine applications UK delivery is by 1st class Royal Mail. European and Worldwide shipping is also available.
There are two types of header tank cap fitted to the marinised versions of these engines Perkins Prima M60, depending on the type of heat exchanger. To ensure that this cap is compatible with your engine, please choose either 27mm or 32mm height option...
We now offer two options of this sea water pump - the original equipment from Jabsco and the alternative from Ancor, made in Italy
1. High quality original equipment Jabsco bronze sea water pump that fits Perkins Prima M60...
An original OE sea water pump drive coupling to fit Prima M60 version:
BA - 504-2
The pump is engine driven directly from the camshaft. Please note this coupling is not a suitable replacement for the later engines that had a belt driven pump. UK...
Perkins Prima M60 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our overhaul kit fits all versions of the engine mounted...
Replacement 'standard impeller kits', 'service kits' and 'rebuild kits' for Perkins Prima M60. Our kits include an excellent quality 12 blade, 57 mm diameter neoprene rubber impeller molded to a splined brass coupling. The 'standard impeller kit'...
Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...
A quality Perkins Prima M60 (BA -504-2) 12V 2.2kW starter motor ideal for marine use. Details: 3 Hole mount, 45° mounting position, Insulated Return electrical feature, Pinion Info: 10t, 39.3, M2.54, 20°, 3.12mm; Pinion position: 29 / 41;...
Perkins Prima M60 alternator 12V, for marine versions of these engines set up for a 'three lug' mounted alternator.
We stock high quality earth return and insulated earth alternators.
Earth Return (Grounded) high output 70 amp alternator, requires...
A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overheating.
Suitable for use in all types of vehicle requiring an MEG coolant.
Suitable for Ferrous and...
Engine enamel paint manufactured as a match for Perkins engine paints and manufactured solely for Parts4Engines.
Marine Blue - extensively used by Perkins on early marine engines such as the 4.108
Dark Blue - used predominantly on Perkins industrial...
A quality marine lead-Acid battery 12v, 80Ah with dual terminals and a 2 year warranty.
Sealed lid (leak /spill proof tip-tilt)
Vibrolock plate fixing
State of charge indicator
Intergrated flame arrestor