A comprehensive set of quality aftermarket gaskets and seals for the top end of your Volvo Penta 2003T. Our set includes:
Cylinder head gasket - top quality laminated head gasket with silicon beading around water jacket areas
Rocker cover gasket...
A comprehensive set of quality aftermarket gaskets and seals for the bottom end of your Volvo Penta 2003T engine. The set includes:
Timing cover gasket
Raw water pump access plate gasket
Front and rear crankshaft lip seals
hand crank lip...
A quality aftermarket Volvo Penta 2003T Piston Ring set.
Each set comprises
top compression ring - chrome-vanadium, parallel
second compression ring - cast, parallel
third oil control ring - chrome-vanadium, spring loaded slotted scraper...
Volvo Penta 2003T Main bearing set. Volvo part number 875751, available in the following sizes:
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
A set of quality aftermarket connecting rod bearings for your Volvo Penta 2003T engine. Available in the following sizes:
Under size -0.25mm
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is also...
Aftermarket Volvo Penta 2003 Cylinder head bolt set, Details:
Set includes 14 head bolts
length 100mm (measured from underneath head)
Volvo part number 970888
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is...
A set of aftermarket cylinder head valves to fit all Volvo Penta 2003T engines, set includes
x3 Exhaust valve only
UK delivery is by Royal mail first class post or courier, European and Worldwide delivery is available.
15W-40 Marine engine oil. An high performance (HPE) multigrade diesel engine oil specially designed for the lubrication of high-speed marine engines operating under severe conditions and under all weather conditions. Details:
A high quality base oil...
Quality aftermarket engine mount for the Volvo Penta 2003T engine have been designed solely for Parts4engines in close collaboration with a large European OE manufacturer and have been subject to our rigorous quality control procedures. They...
LUCAS Magnum SAE 15W40 engine oil is ideal for Volvo Penta engines and meets or exceeds recommendations for Volvo VDS-3 oil. It is designed to last up to twice as long as plain 15W-40 oils.
Lucas say it holds much more soot in suspension than...
A high quality aftermarket oil filter manufactured by MANN, suitable for Volvo Penta 2003T engine version.
UK delivery by 1st class Royal Mail or courier. European and Worldwide shipping is also available.
Lloyds Approved Nautilus Marine Exhaust Hose. This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced by a steel helix wire. Details:
Salt water resistant, EPDM rubber
Ozone and abrasion...
A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details:
304 Stainless steel
Wide width provides a uniform clamping force
Nyloc nut prevents...
Wynn's Injector cleaner for petrol and diesel engines, 325ml. Designed to neutralise the negative effects of water in fuel. Details:
Add to the fuel tank
One bottle treats up to 60 liters
Cleans the injectors of petrol and diesel...
Aftermarket quality nozzles manufactured by Bosch for your Volvo Penta 2003T engine.
The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively expensive, the alternative option of reconditioning your existing...
Aftermarket Volvo Penta 2003T Injector pump shim kit. This shim kit contains both 'hard and soft' shims which can be configured to create the following sizes.
UK delivery is by 1st class...
These are high quality aftermarket pump manufactured in Europe. They are very well engineered and are excellent value.
There are two types of lift pump now available for the Volvo Penta 2003T. You can choose from either the earlier (unsealed) or the...
Aftermarket Volvo Penta 2003T water pipe seal and fuel washer kits. A comprehensive range of kits put together by Part4engines and which include all the washers and seals you are going to need to overhaul the water or fuel pipe system on the 2003T engine...
Aftermarket Volvo Penta 2003T fuel filter.
We stock primary and secondary fuel filters for the Volvo Penta 2003T engine. The primary filter is usually bulkhead mounted between the tank and the engine, whilst the secondary filter is located at the front...
Genuine OE VDO Volvo Penta 2003T Thermo Monitor, details (new old stock):
Volvo Penta part number 858229
Opening temperature 95°
Fits engine versions 2003T, 2003TB, 2003TB SOLAS
UK delivery is by 24 hour courier...
Aftermarket Volvo Penta 2003T heat exchanger service kit. We recommend regular servicing of the heat exchanger to avoid overheating problems caused by blockages from limescale build up and broken up impeller blades.
The kit includes:
A high quality aftermarket 316 stainless steel exhaust outlet for the Volvo Penta 2003T that provides a long-term solution to the 'Achilles heel' of these engines, which is terminal corrosion in the original factory fitted cast iron exhaust outlet...
A quality aftermarket Volvo Penta 2003T Thermostat with seal: We have two options available:
Direct cooled engines 60°C / 62°C Volvo Part number 877355
Freash cooled engines 74°C Volvo Part number...
A set of five quality aftermarket raw water pump cover plate gaskets.
Outside diameter 76mm
Equivalent to Pekins part number 0490785
Equivalent to Jabsco part number 3298-0000
Equivalent to Volvo part...
MPM propeller shaft grease is specially developed for marine applications. The grease has a very high resistance to water washout and is therefore particularly suitable for use in stern glands. This grease is also suitable for:
Lubricating rudder and...
Aftermarket Volvo Penta 2003T Circulation pump repair kit.
With a new Volvo Penta 2003T coolant circulation pump (OE part #860358 or #23401753) being prohibitively expensive at over £500, we have put into manufacture a repair kit that...
Aftermarket Volvo Penta 2003T raw water pump End Cover kit.
The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our end cover kit for Volvo Penta 2003T...
Excellent quality aftermarket kits for the original engine driven raw water pump on Volvo Penta 2003T engine. Our impellers are manufactured from the correct grade of high quality neoprene rubber and are moulded on to a machined brass coupling with...
Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...
A high quality genuine OE bronze raw water (seawater) pump. Manufactured by Johnson Pumps, this is a genuine replacement part for the Volvo Penta 2003T (turbo version).
our kit includes:
x1 Raw water pump
x1 Pump to engine block 'O' ring
A top quality aftermarket Volvo Penta alternator. 12 volt, 70 amp, 'isolated earth', direct replacement alternator to fit the Volvo Penta 2003T turbo engine.
Note that the alternator is supplied with a fan but not a pulley, so you will need to...
A genuine OE Volvo Penta 2003T standard instrument panel to fit the following engine versions:
2003T and 2003TB
Two options are available:
Panel for use with a push start button Volvo part number 872798 or
Panel for use...
A pair of quality aftermarket Volvo Penta zinc plate anodes for folding propeller. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic...
Aftermarket Volvo Penta 2003T Starter Motor relay
Made in Austria
Comes with optional mounting bracket
UK mainland delivery is by 1st class Royal Mail or courier. European and Worldwide shipping are also available.
A genuine Volvo Penta 2003T expansion tank Pressure Cap.
Volvo Penta part number 1542591
Rated at 50 kPa
UK delivery is by 1st class post or courier, European and Worldwide delivery is also available.
Genuine Volvo Penta propeller shaft Stuffing box / Stern gland kit, for Volvo Penta MD2010, MD2020, MD2030 and MD2040 and 2000 Series engines. Kit includes:
Seal Install protector
Clamp anti-pinch plate
Tube of grease
x 2 Nuts and...
Quality aftermarket rubber hull mounting covers for Volvo Penta 110, 120, 130, 150 and MS25S saildrive's.
Our covers are suitable for the following saildrive models:
Option 1 - S110S S120C, 120SB, 120S-E , 120S-D, MS25S-A, MS25SR-A...
A genuine OE Volvo Penta Rubber Diaphragm Seal and gasket kit for 110S 120S 130S 150S and MS25S.
Volvo part number 21389074
Fits 110S, 120S, 130S, 150S and MS25S sail drives
Volvo Penta currently recommend replacing the...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this aftermarket split ring zinc anode kit fits the full range of Volvo Penta...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this aftermarket zinc anode fits the full range of Volvo Penta 120...
A quality aftermarket universal water resistant tachometer and hour meter, ideal for use in the marine environment and manufactured exclusively for Parts4engines Ltd. This tachometer can be configured to work in conjunction with alternators,...
JB MarineWeld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar surfaces.
For metal, aluminum, plastic composites, fiberglass, wood and others.
1:1 mixing ratio that...
JB Marine Weld is a specially formulated two-part steel reinforced epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces.
For aluminum, metal, plastic composites, fiberglass, wood, ceramic and...
Aftermarket Volvo Penta starter motor for Volvo Penta 2003 Turbo engine version. This is a quality product manufactured by a Bosch group company.
Voltage 12, 1.4 kW
Number of teeth 9
Mount. flange 82.50mm
Drive distance 34...
Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use.
Band width 12.5mm
Band diameter given in the options above is the 'maximum'.
UK delivery is by 1st class Royal Mail,...
Quality aftermarket 12v battery voltmeter. This is a waterproof gauge, ideal for use in the marine environment.
Measuring range 10 to 15 Volts (full deflection)
Face colour black, with black...
A comprehensive, aftermarket propeller shaft seal kit for the Volvo Penta 120s, 130s, 150s and MS25S Saildrive, including all the parts you will need to change a leaking shaft seal. Includes:
2 x propeller shaft nitrile lip seals with...
A quality aftermarket heavy duty zinc shaft anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market.
This shaft anode...
Engine enamel paint primer manufactured as a match for our top coat colours.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...
A quality aftermarket enamel engine paint which is an accurate match for the original 'solid green' Volvo Penta paint and manufactured in the UK solely for Parts4Engines.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It...