These are high quality Yanmar 3GM30 engine mounts are manufactured in the EU. The steel base and cap are treated with a specially developed Nickel-Zinc electrolytic coating, which has been successfully tested in rigorous salt spray laboratory tests and shown to minimise corrosion. In addition, the base and cap are also painted giving extra protection. The mounts have the correct rubber stiffness (measured in 'shore') for these engines and are designed to give high defection at low loads. This means that their natural frequency is low and makes them ideal for use on marine engines that normally work at low engine speeds.
- For front mounts, we recommend our '50 shore' mounts (max 75kg load) Yanmar reference this mount as their '100' mount with part number 124772-08341.
- For rear mounts, we recommend our '40 shore' mounts (max 40kg load) Yanmar reference this mount as their '75' mount with part number 128270-08341.
The mount is supplied with a pair of anodised M16 nuts and 'shakeproof' washers.
Available individually by selecting the options buttons above, or as an engine set of four mounts at a discounted price.
UK shipping is by courier, European and Worldwide shipping are also available.
1 Review Hide Reviews Show Reviews
I replaced very old Yanmar units with these and was pleasantly surprised how it went. The units are like for like identical which made swapping units a breeze. I thought about stopping after installing just 2 but I went ahead and changed all 4 which was definitely required. Based on installation ease and a 30min engine test, I would definitely recommend these units..