Perkins 4.107

Perkins 4.107 Fuel Pipe kit

A replacement aftermarket  fuel line kit for your Perkins 4-107 with copper pipes cut over sized and supplied with a pipe cutter so you can achieve the perfect length. Also included are replacement solid brass sleeve nuts and olives. Kit...

Nautilus Marine 51mm Wet Exhaust Hose - Lloyds Approved

Lloyds Approved Nautilus Marine Exhaust Hose.  This is a strong but flexible rubber hose manufactured from synthetic textile fabrics and reinforced by a steel helix wire.  Details: Salt water resistant, EPDM rubber Ozone and abrasion...

Stainless steel T-Bolt Clamp set

A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details: 304 Stainless steel Wide width provides a uniform clamping force Nyloc nut prevents...

Perkins 4.107 Fuel Washers & Seal kit

Aftermarket fuel washers and seal kit for Perkins 4.107 Series engines. Kit Includes: x4   Injector copper washers  x8   Fuel return pipe washers x6   Fuel filter assembly washers x10 Fuel pipe...

Perkins 4.107 Glowplug Adapter

A quality aftermarket adapter sleeve for the glowplug on marine versions of the Perkins 4.107. These heat resistant plastic adapters are designed to electrically isolate the glowplug from the inlet manifold. UK delivery is by 1st class Royal Mail or...

Wynn's Injector Cleaner

Wynn's Injector cleaner for petrol and diesel engines, 325ml. Designed to neutralise the negative effects of water in fuel.  Details: Add to the fuel tank One bottle treats up to 60 liters Cleans the injectors of petrol and diesel...

Perkins 4.107 Glowplug Thermostart

Quality aftermarket Perkins 4.107 12v cold start plug (thermostart) available with either: 'push on' 'spade' connection, or 'screw' type connection. A burnt-out coil on your glowplug is often one of the main causes of poor cold...

Perkins 4.107 Water Inlet Connector

High quality aftermarket Perkins 4.107 coolant inlet connector. This is the short tube that is pressed into the block just below the alternator position. They are prone to corrosion so our replacements are a upgrade of the original...

Perkins 4.107 Breather Hose kit

High quality aftermarket Perkins 4.107 breather pipe kit replaces the right angle hose located between the rocker cover and the inlet cowl on all factory marinised versions of these engines, which were fitted with a 'mushroom' type inlet manifold...

Perkins 4.107 Header tank cap 'short reach'

Aftermarket Perkins 4.107 header tank cap, to fit a combined header tank/heat exchanger at the front of the engine, fitted with a 60 mm diameter winged cap- 'short reach' with a height of 27mm. All of our caps are aftermarket made in England from high...

Perkins 4.107 Exhaust Outlet Gasket

High quality aftermarket, Perkins 4.107 Exhaust Outlet Gasket. UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

Perkins 4.107 exhaust elbow water connector kit

We can now offer an high quality upgraded aftermarket exhaust elbow connector for Perkins 4.107 kit for marine engines.   Manufactured from 316 Stainless steel this 'fit and forget' connector is a huge improvement on...

Perkins 4.107 Water Temperature Sender

Good quality aftermarket water temperature sender that fits the majority of early Perkins 4.107 engines. Details: Spade type electrical connection Suitable for 12v or 24v systems Supplied with a sealing washer This will not fit directly into to a...

Perkins 4.107 Bowman Exhaust Outlet kit

A Perkins 4.107 aftermarket exhaust outlet elbow, this is a robust 'budget' aftermarket alternative, available in two versions, straight and 45 degree. Details: Exhaust pipe outer diameter 51 mm Water feed pipe diameter 32 mm   4 bolt...

Perkins 4.107M Heat Exchanger & Oil Cooler Seal Kits

A set of replacement heat exchanger and oil cooler seals for Perkins 4.107M early version. These are high quality nitrile rubber seals, manufactured to the correct elasticity (shore) for this marine application. The 'early' kit comprises the 4x nitrile...

Perkins 4.107 Temperature Sender Adapter

Aftermarket Perkins 4.107 Temperature sender adapter; thread size 1/2" to 3/8"NPT UK shipping is by 1st class post, European and Worldwide shipping are available

Perkins 4.107 Drain Tap

Perkins 4.107 Coolant drain tap. This is a quality aftermarket part manufactured for Parts4engines. Details: Fully machined from solid brass Thread size 1/4 BSP These drain taps have tapered threads and fit all versions of these...

Perkins 4.107 Thermostat Housing kit

A replacement aluminium thermostat housing to fit Perkins 4.107 marine engines. Kit includes: Thermostat housing Housing gasket Hylomar sealant To fit a hose with a 30mm internal diameter. UK delivery is by 1st class Royal Mail or courier...

Perkins 4.107 Thermostat kit

Quality aftermarket Perkins 4.107 thermostat kit, two versions available: 82oC opening temperature for automotive and industrial applications. 75oC opening temperature for marine applications Kit includes thermostat, gasket and a tube of...

Perkins 4.107 coolant hose set (for front mounted exchanger)

Quality aftermarket  Perkins 4.107 (Marine version to fit front mounted heat exchanger) coolant hose replacement kit, contains 5 hoses with stainless steel hose clip option. Kit includes: header tank to exhaust manifold raw water pump to...

Perkins 4.107 Raw Water Pump Alignment Tool

Perkins 4.107 Raw water pump alignment tool, used to centralise the adaptor plate to ensure reduced wear on the drive shaft components and as specified in the Perkins workshop manual. UK delivery is by 1st class Royal Mail. European and Worldwide...

Raw water pump cover plate gasket set

A set of five quality aftermarket raw water pump cover plate gaskets.   Outside diameter 76mm Equivalent to Pekins part number 0490785 Equivalent to Jabsco part number  3298-0000 Equivalent to Volvo part...

MPM Propeller Shaft Grease

MPM propeller shaft grease is specially developed for marine applications. The grease has a very high resistance to water washout and is therefore particularly suitable for use in stern glands. This grease is also suitable for: Lubricating rudder and...

Perkins 4.107 raw water pump mounting plate gasket kit

Quality aftermarket Perkins 4.107 raw water pump mounting gaskets, to fit a 'Jabsco' raw water pump.  Kit contains: x1Pump to mounting plate gasket x1 Inner mounting ring to timing cover gasket x1 Timing cover to mounting plate...

Perkins 4.107 Raw Water Pump Hose Tails pair

Quality aftermarket Perkins 4.107 Raw Water Pump Hose Tails (pair) to fit hose diameter 26 mm. UK, European and Worldwide delivery available.

Perkins 4.107 raw water pump end cover kit

Perkins 4.107 raw water pump end cover kit. The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our overhaul kit fits all versions of the engine mounted raw...

Perkins 4.107 raw water pump Impellers & Service kits

Quality aftermarket replacement 'standard impeller kits' and 'raw water pump service kits' for the factory marinised version of Perkins 4.107 fitted with the bronze engine driven raw water pump. Our impellers are excellent quality 12 blade...

Perkins 4.107 Jabsco raw water pump drive shaft coupling

Perkins 4.107 Jabsco raw water pump drive shaft coupling UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

Perkins 4.107 Jabsco raw water pump drive

Perkins 4.107 Jabsco raw water pump drive. This part is only suitable for the Jabsco raw water pumps. UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

Perkins 4.107 Jabsco Raw Water Pump Mounting Kit

Perkins 4.107 raw water pump connecting kit enables you to attach or replace the standard Jabsco raw water pump fitted to these engines via the timing cover.  Kit comprises: Inner fixing ring Outer mounting plate x3 Gaskets Gasket sealant x4...

Perkins raw water pump screws

A set of 6 raw water pump impeller end cover plate screws. High quality brass screws, manufactured for Parts4engines. Well worth keeping a spare set as they can often fall into the bilge! Suitable for the following Perkins engine versions: 4...

Rydlyme Marine descaler

Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...

Perkins 4.107 High Water Temperature Alarm

A quality aftermarket bulkhead mounted warning alarm for Perkins 4.107, supplied with a high temperature switch. Ideal for marine use, as it gives an audible alarm in the event of high engine temperature. We supply this with male and female lucar...

Perkins 4.107 Water pump Back Plate

Quality aftermarket Perkins 4.107 Water pump back plate fitted between the water pump and the engine block. Two options are available: Mild steel Stainless steel. UK, European and Worldwide delivery available.

Perkins 4.107 Water Pump kit

High quality aftermarket Perkins 4.107 Water pumps manufactured specifically for us. They are available with either the standard pulley for a 12 mm (7/16") wide belt, or the pulley for a wider 13 mm (1/2") belt often found on marine versions. If...

Perkins 4.107 Low Oil Pressure Alarm

A quality aftermarket low oil pressure alarmfor Perkins 4.107 is a quality bulkhead mounted warning alarm, to be used in conjunction with an oil pressure switch (thread size: 1/8 NPTF). Ideal for marine use, as it gives an audible alarm in the event...

Perkins 4.107 Alternator Belt

Top quality aftermarket alternator and water pump belt which are the correct fitment for standard engines Perkins 4.107. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts. There are two widths of belt used...

JB Marine Weld Syringe

JB MarineWeld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar surfaces. For metal, aluminum, plastic composites, fiberglass, wood and others. 1:1 mixing ratio that...

Alternator 'Euro connector' plug kit

Aftermarket alternator wiring connector kit, commonly known as a 'euro connector'. Fits many standard 3 pin alternators. UK delivery is by 1st class Royal Mail or courier.  European and Worldwide delivery is available.

Perkins 4.107 Alternator 12V 45 Amp

High quality aftermarket Perkins 4.107 alternator 12V fits all versions (including marine) of these engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can be seen from...

Perkins 4.107 Alternator 12V 65+ Amp

High quality aftermarket 12 volt 65+ amp alternators fit all versions (including marine) of Perkins 4.107 engines set up for a 'three lug' mounted alternator. The adjuster arm securing bolt is at a 120 degree angle to the mounting arms as can be...

JB Marine Weld

JB Marine Weld is a specially formulated two-part steel reinforced epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces. For aluminum, metal, plastic composites, fiberglass, wood, ceramic and...

Perkins 4.107, 12v 150A Insulated earth starter solenoid

Quality aftermarket 12 Volt, 150 Amp starter solenoid. This solenoid is for use with an Inertia type of starter motor. It requires a direct earth connection and consequently it is ideal for marine use to help avoid galvanic corrosion...

Perkins 4.107 Starter Solenoid 100 Amp

Quality aftermarket Perkins 4.107 starter solenoids suitable for automotive' or a marine applications. Our automotive version is suitable for applications where the base of the unit is 'grounded' to the negative electrical supply...

12v Heavy duty relay (100 amp)

High performance electrical relay with mounting bracket suitable for high current switching. Details: 12v 100 amp  Dimensions 4.5cm x 4.5cm x 7cm Connections 2x 6mm screw terminals and 2 lucar terminals UK delivery is by1st class post...

Perkins 4.107 Ignition switch

A starter/ignition switch for Perkins 4.107 engines, we offer two switch options, which have either 4 pin or 6 pin electrical connections and differing key positions, as can be seen from the photos. Please choose...

Liqui Moly Marine Anti-Limescale 5L

High quality Liqui Moly Marine Anti-Limescale 5L. This is a water based solution with inorganic acid to remove limescale deposits within engine cooling systems  Liqui Moly aim to produce 'the best but not always not the cheapest' products...

Liqui Moly Marine Antifreeze 5L

High quality Liqui Moly Marine Antifreeze 5L. This is a Glycerin and water based product offering excellent winter protection.  Liqui Moly aim to produce 'the best but not the cheapest' products available.  Product details: Biologically...

Siderise Marine sound proofing

After extensive research we are pleased to offer an exceptional quality 32mm Siderise acoustic panel.  This is a composite panel specifically designed for marine use and is ideal for suppressing noise from engine compartments or bulkheads...

Enfield / Sonic Flexible shaft Coupling

A quality flexible drive shaft coupling for connecting the gearbox output flange to the propeller drive flange. Manufactured by R & D Marine this coupling fits 4.99, 4.107 and 4.108 engines fitted with a Enfield leg. Gearbox...

Stainless Steel hose clips

Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Band diameter given in the options above is the 'maximum'. UK delivery is by 1st class Royal Mail,...

MPM Antifreeze Concentrate 5 litre

Standard ethylene glycol concentrate (antifreeze) from MPM, can be used throughout the whole year in the cooling systems of petrol and diesel engines. This antifreeze should be further diluted before use with water in the recommended ratio. Freezing...