A comprehensive kit which includes the major components that you will need to overhaul your tired and smoking Volvo Penta TMD22 engine!
This overhaul kit includes the following parts:
4 x pistons - these are the correct 3 ring pistons with valve...
Volvo Penta TMD22 bottom gasket set. A very comprehensive set of quality gaskets and seals for the bottom end of your Volvo Penta.
We strive to offer the most comprehensive bottom gasket set available. The contents are manufactured to our own...
A genuine OEM Volvo Penta TMD22 Turbo. This is a high quality, new turbocharger manufactured by Garrett, the original suppliers of the turbocharger on the TMD22.
Our kit includes........
New Garrett turbocharger
A pair of exhaust...
Volvo Penta TMD22 gasket set, a very comprehensive set of quality gaskets and seals for the top end of your engine.
Cylinder head gasket - top quality and silicon lined
Laminated inlet/exhaust manifold gasket
Set of both early and...
A set of high quality replacement valves and spring sets, as fitted to Volvo Penta TMD22.
Inlet valves x 4
Exhaust valves x 4
Optional spring set
These valves are manufactured for us and to our discerning standards. Valve springs are genuine OE...
A genuine OE set of Volvo Penta TMD22 Thrust washers.
UK delivery is by signed for courier or first class post. European and Worldwide delivery is also available.
Volvo Penta TMD22 Cam follower. A genuine quality original replacement part to fit all versions of this engine.
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is available.
Volvo Penta TMD22 connecting rod bearings. UK delivery is by next day courier. European and Worldwide shipping is also available.
Volvo Penta TMD22 cylinder head valve guide, this is a genuine replacement and fits all versions of this engines.
External diameter 12mm
UK delivery is by Royal mail 1st class post or next working day courier. European and...
Volvo Penta TMD22 main bearings, available in the following sizes:
UK delivery is by next day courier. European and Worldwide shipping is also available.
Volvo Penta TMD22 Oil pump kit. This kit contains an oil pump rotor (no longer available from Perkins) and a oil pressure relief valve kit . Kit details:
x1 Oil pump rotor
x1 Oil pump rotor outer
x1 Oil pressure relief...
Volvo Penta TMD22 replacement head bolt set. These high quality, correctly tempered parts fit all versions of this engine, including normally aspirated and turbocharged marine versions. The set also includes with our data sheet with head bolt tightening...
A quality set of fuel and oil filters manufactured by Perkins. We supply a Bosch oil filter for the later TMD22B, TMD22P-B, TMD22P-C engines
TMD22B, TMD22P-B, TMD22P-C
UK delivery is by 1st class Royal Mail. European...
A quality oil filter manufactured by Perkins or Bosch,
TMD22A - Perkins
TMD22B, TMD22P-B, TMD22P-C - Bosch
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
A top quality Volvo Penta TMD22 timing belt kit which is the correct fitment for all versions of this engine, including marine. These are heavy duty belts produced by 'Gates', the leading manufacturer of aftermarket belts.
The tensioner pulley and idler...
Top quality Volvo Penta TMD22 alternator belt which is the correct fitment for standard engines. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts.
UK delivery is by 1st class Royal Mail. European and Worldwide...
Volvo Penta TMD22 marine engines replacement engine mounts. These mounts have a 'stiffness' rating of (45 shore) are correct for the weight of this engine thus maintaining structural safety, but also reducing to a minimum the transmission of engine...
A quality replacement diesel lift pump for Volvo Penta TMD22 engines. These pumps are very well engineered and excellent value. Supplied with a gasket x2 brass sleeve nuts, 2 rubber olives, and a tube of Hylomar.
You might also be interested in our...
A set of four nozzels for Volvo Penta TMD22, manufactured by Delphi CAV or Bosch
The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively expensive, the alternative option of reconditioning your existing...
Replacement 12v stop solenoid that fits all versions of Volvo Penta TMD22 engines fitted with the electrically operated stop solenoid that screws directly into the fuel injection pump.
There are two types available:
'Pull type' - this standard...
The 500FG is a quality aftermarket bulk-head mounted pre-filter. It features a turbine filtration system and is similar to the Racor 500FG. It is designed to filter various contaminants such as water, dirt, rust, and algae Turbine...
Volvo Penta MD22. TMD22 and TAMD Injector pump drive pulley.
Volvo part number 861405
UK shipping is by courier, European and Worldwide shipping are also available.
Genuine OE fuel cartridge filter (diameter 88 mm) manufactured by Perkins and suitable for Volvo Penta TMD22A, TMD22-A, TMD22-B, TMD22P-C engine.
UK shipping is by Royal Mail or courier, worldwide shipping is also available.
A high quality 316 stainless steel replacement water injection elbow for Volvo Penta TMD22 engines. Will not corrode over time! Kit includes:
Right angle 316 stainless connector
x2 stainless bolts
'O' ring seal
Equivalent to Volvo Penta part...
Volvo Penta TMD22 exhaust outlet gasket, a quality UK hand cut gasket.
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is also available.
A high quality 316 stainless steel CNC machined exhaust outlet for your Volvo Penta TMD22 engine. Unlike the OE part, this outlet will not corrode over time and is a genuine 'fit and forget' upgrade! Compatible with the following versions:
A set of four quality glowplugs to fit Volvo Penta TMD22 engine. Easy to change and a great help to cold starting! UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
Volvo Penta TMD22 water pump as fitted to all marine versions of this engine.
This is a very high quality pump manufactured for parts4engines and represents an improvement in quality and cost when compared to a genuine OE pump...
A pair of end caps for the early marine version of this Volvo Penta TMD22 engine, model TMD22A. These are the 'rubber boot' end caps that fit on either end of the exhaust mounted heat exchanger.
*This pair of end caps is not suitable for the late...
This thermostat fits all versions of this Volvo Penta TMD22 engine and has the correct 82oC opening temperature. Comes complete with a gasket and a tube of Hylomar non-setting and non-hardening sealant.
You might also be interested in our top gasket...
Volvo Penta TMD22 insulated earth temperature gauge sender for marine applications. This is an original OE part. UK delivery is by 1st class Royal Mail. European and Worldwide shipping is also available.
A genuine Volvo Penta TMD22 expansion tank Pressure Cap.
Fits TMD22A and MD22L-A
Volvo Part number 844624
Rated at 30 kPa
UK delivery is by 1st class post or courier, European and Worldwide delivery is also available.
Volvo Penta TMD22 Exhaust Elbow Hose Connector, fits versions TMD 22B & TMD22P-C.Includes:
x2 fixing pins
x1 'O' seal
To fit hose with a 25mm internal diameter. Volvo part number 858659
UK delivery is by first class post or next...
There are two types of header tank cap fitted to the marinised versions of these engines Volvo Penta TMD22, depending on the type of heat exchanger. To ensure that this cap is compatible with your engine, please choose either 27mm or 32mm height option...
A high quality original equipment bronze sea water pump that fits the following versions of these engines.
Volvo Penta TMD22A
The pump is engine driven directly from the camshaft. Please note that this pump is not a suitable replacement for the...
Volvo Penta TMD22 Raw water pump, a quality aftermarket pump by Ancor, manufactured in Italy and fitted to the later models. This pump offers considerable savings on the genuine OE pump from Volvo.
Suitable to fit the following models:
A quality replacement raw water pump drive belt, manufactured by 'Gates' to fit your Volvo Penta TMD22. This belt drives the raw water pump mounted at the rear of the engine.
UK delivery is by 1st class Royal Mail. European and Worldwide shipping...
An original OE sea water pump drive coupling to fits the following versions of these engines.
Volvo Penta MD22A, MD22A-A, MD22L-A, TMD22A, TMD22-A, MD22 & MD22L
The pump is engine driven directly from the camshaft. Please note this coupling is...
The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our end cover kit for Volvo Penta TMD22 fits all earlier or late versions of these engines that were...
Replacement impeller, service and rebuild kits for all factory marinised versions Volvo Penta TMD22 fitted with the bronze engine OR belt driven raw water pump.
Please note that there were two different raw water pumps used on these...
Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...
A quality Volvo Penta TMD22 12V 2.2kW starter motor ideal for marine use.
Pinion Info: 10 teeth
Insulated Return electrical feature
3 Hole mount
Total length 261mm
Replaces Volvo part number 859722
A top quality Volvo Penta Alternator TMD22 (pulley not included), 12 volt, 70 amp, 'isolated earth', direct replacement alternator to fit the following Volvo Penta engines:
We include in the kit a packet of...
A quality universal water resistant tachometer and hour meter, ideal for use in the marine environment and manufactured exclusively for Parts4engines Ltd. This tachometer can be configured to work in conjunction with alternators, magnetic...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this split ring zinc anode kit fits the full range of Volvo Penta 120 Saildrive...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this zinc anode fits the full range of Volvo Penta 120 Saildrive units...
A genuine Volvo Penta Rubber Diaphragm Seal and gasket kit for 110S 120S 130S 150S and MS25S.
Volvo part number 21389074
Fits 110S, 120S, 130S, 150S and MS25S sail drives
UK delivery is by next working day courier. Please...
A Mono Ethylene Glycol (MEG) based engine coolant and anti-freeze concentrate from Comma. Gives up to 2 years protection against freezing and overheating.
Suitable for use in all types of vehicle requiring an MEG coolant.
Suitable for Ferrous and...
A quality heavy duty zinc shaft and prop anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market...
A quality, strong Stainless Steel worm drive clamp ideal for both the marine environment and industrial use.
Band width 12.5mm
UK delivery is by 1st class Royal Mail, European and Worldwide delivery is available.
A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details:
304 Stainless steel
Wide width provides a uniform clamping force
Nyloc nut prevents...
Engine enamel paint primer manufactured as a match for our top coat colours.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...