Created with Sketch. Created with Sketch.

Shop by Category

Yanmar 1GM10 parts

1gm10-banner.jpg

Specification: Bore 75mm - Stroke 72mm - Capacity 0.318L - Indirect injection - Power 6.6kW -  Weight 71 kg

  • Yanmar 1GM10 Piston ring set, from Parts4engines.com

    Yanmar 1GM10 Piston ring set

    A high quality set of Piston rings to fit Yanmar 1GM10 Engines, details: Yanmar part number  721575-22500,  replaces: 705311-22500 To fit 75mm Bore Standard size and +0.25mm available  x1 Piston compression ring (Top) x1...

    £15.00
    Choose Options
  • Yanmar 1GM10 Piston with rings

    Yanmar 1GM10 Piston with rings

    Excellent quality aftermarket Piston with rings for Yanmar 1GM10 engines, offering considerable savings on genuine Yanmar parts. Details: Includes x1 piston, x1 Gudgeon pin, x2 pin circlips  For 75mm bore (Please note this piston will not...

    £49.50
    Choose Options
  • Yanmar 1GM10 Crankshaft oil seals, from parts4engines.com

    Yanmar 1GM10 Crankshaft oil seals

    A set of quality aftermarket front and rear crankshaft oil seals, to fit Yanmar 1GM10 engines. Yanmar part numbers Front 121450-01801 Rear  124085-02220 UK delivery is by 1st class post or courier, European and Worldwide...

    £9.50
    Add to Cart
  • Yanmar 1GM10 Oil Filter - parts4engines.com

    Yanmar 1GM10 Oil Filter

    A high quality Oil Filter element to fit Yanmar 1GM10 engine UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.

    £6.00
    Add to Cart
  • 500 FG Turbine Fuel assembly, from parts4engines.com

    500 FG Turbine Fuel Filter Assembly

    The 500FG is a quality aftermarket bulkhead mounted pre-filter. It features a turbine filtration system and is similar to the Racor 500FG.  It is designed to filter various contaminants such as water, dirt, rust, and algae and imporantly the top...

    £65.00
    Add to Cart
  • Yanmar 1GM10 fuel lift pump, from parts4engines.com

    Yanmar 1GM10 fuel lift pump

    Yanmar 1GM10 fuel lift pump Kit -  A high quality aftermarket pump manufactured for us in Europe. They are very well engineered and excellent value.To finish the job off properly you are going to need to renew the gasket, so we include one...

    £45.00
    Add to Cart
  • Yanmar 1GM10 Raw water pump End Cover kit - parts4engines.com

    Yanmar 1GM10 Raw water pump End Cover kit

    Raw water pump end cover kit for Yanmar 1GM10 engine The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our kit fits all versions of the engine mounted raw...

    £15.00
    Add to Cart
  • Yanmar Exhaust outlet gasket, from parts4engines.com

    Yanmar Exhaust outlet gasket

    Yanmar exhaust outlet gasket 90mm x 63mm bolt hole  pcd's 70m & 43mm Internal exhaust chamber 47mm x 38mm UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is available.

    £4.00
    Add to Cart
  • Yanmar 1GM10 Stainless Steel Exhaust outlet - parts4engines.com Yanmar 1GM10 Stainless Steel Exhaust outlet - parts4engines.com

    Yanmar 1GM10 Stainless Steel Exhaust outlet

    A very high quality precision stainless steel CNC machined exhaust outlet riser to fit Yanmar 1GM10 engines.  This high quality stainless steel outlet replaces a common weakness with the originally fitted exhaust outlets. The combination of hot...

    £275.00
    Add to Cart
  •  Yanmar Saildrive seal, from parts4engines.com Yanmar  Saildrive seal

    Yanmar Saildrive seal

    A quality aftermarket rubber hull mounting cover for Yanmar SD25, SD30, SD31, SD40 and SD50 saildrive's. Equivalent to Yanmar part number 196420-02550 or 196420-02551.  The cover has a total dimension of 317x 237mm, with the internal 'raised'...

    £24.00 - £30.50
    Choose Options
  • Yanmar 1GM10 Starter motor - parts4engines.com Yanmar 1GM10 Starter motor - parts4engines.com

    Yanmar 1GM10 Starter motor

    A quality Yanmar 1GM10 Starter motor, manufactured by a Bosh group company. Compatible with Yanmar part number 128170-77010. Electrical specifications Voltage: 12 kW: 1.0 Physical specifications (see pictures) No./teeth: 9 B+ M8 A: Mount. flange...

    £125.00
    Add to Cart
  • Yanmar 1GM10 Alternator belt - parts4engines.com

    Yanmar 1GM10 Alternator Belt

    Top quality alternator and water pump belts which are the correct fitment on Yanmar 1GM10 engines. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts. Please choose from the following two options: for...

    £10.50
    Choose Options
  • Yanmar 1GM and 1GM10 Anode,  from parts4engines.com

    Yanmar 1GM and 1GM10 Pencil Anode

    Quality aftermarket Yanmar zinc pencil anode, for use in salt water. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in...

    £5.50
    Add to Cart
  • Yanmar Saildrive Anode,  from parts4engines.com

    Yanmar Saildrive Anode

    Quality aftermarket Yanmar zinc pencil anode, for use in salt water. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in...

    £6.50
    Add to Cart
  • Yanmar 1GM10 Alternator, from parts4engines.com Yanmar 1GM10 Alternator, from parts4engines.com

    Yanmar 1GM10 Alternator 12V 35 Amp

    A quality aftermarket Yanmar 1GM10 alternator manufactured by a Bosch group company. Compatible with Yanmar part numbers 128171-77200, 128270-77200 Details: 12V 35 Amp Internal regulator 3 point mount at 180 degrees Includes...

    £95.00
    Add to Cart
  • Yanmar Split Collar Anode. from parts4engines.com Yanmar Split Collar Anode. from parts4engines.com

    Yanmar Split Collar Zinc Anode

    Yanmar Split Collar zinc Anode manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this aftermarket zinc anode fits the...

    £35.00
    Add to Cart
  • Stainless Steel hose clips, from parts4engines.com

    Stainless Steel hose clips

    Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use. Band width 12.5mm Band diameter given in the options above is the 'maximum'. UK delivery is by 1st class Royal Mail,...

    £0.85 - £1.35
    Choose Options
  • Blue Sea Systems Battery Charging Relay, from parts4engines.com Blue Sea Systems Battery Charging Relay, from parts4engines.com

    Blue Sea 120A Split Charge Relay & Switch

    High quality Blue Water 12 or 24v automatic battery charging kit designed in the USA. The kit includes two products, a Dual Circuit Plus battery switch and an Automatic Charging Relay. These components simplify switching and automate charging,...

    £185.00
    Add to Cart
  • Blue Sea Systems Battery Charging Relay, from parts4engines.com Blue Sea Systems Battery Charging Relay, from parts4engines.com

    Blue Sea 120A Split Charge Relay

    High quality SI-ACR Blue Water 12 or 24v automatic battery charging relay designed in the USA. Automatically combines batteries during charging, isolates batteries when discharging and when starting engines.  (More robust than the...

    £120.00
    Add to Cart
  • Shaft Anode UK type, from parets4engines.com Shaft Anode UK type, from parets4engines.com

    Heavy duty propeller shaft zinc anode

    A quality aftermarket heavy duty zinc shaft anode.  Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market. This shaft anode...

    £22.00 - £33.00
    Choose Options
  • Perkins Engine Paint primer from parts4engines.com

    Engine Paint Primer

    Engine enamel paint primer manufactured as a match for our top coat colours. Mid Grey This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...

    £14.00
    Choose Options
  • Yanmar Engine Paint from parts4engines.com

    Yanmar Marine Engine Paint

    Engine enamel paint manufactured as a match for Yanmar's 'Metallic Grey' marine paint and manufactured solely for Parts4Engines. This is a  high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good...

    £14.00
    Choose Options