Volvo Penta D1-13 is a 0.5-L 2 Cylinder 11.8 HP naturally aspirated diesel engine, freshwater cooled: D1-13A 2005 to 2006, D1-13B 2006 to 2008 & D1-13F 2008 on
A genuine Volvo Penta D1-13 & D1-13B starter ring gear, Volvo Penta part number 861973:
Number of teeth
A set of genuine Volvo Penta D1-13 cylinder head bolts.
UK delivery is by 1st class Royal Mail. European and Worldwide delivery also available.
Genuine OEM cylinder head valve set to fit Volvo Penta D1-13 series engines. Set includes 2 inlet and 2 exhaust valves.
UK delivery is by 1st class post or courier. European and Worldwide shipping is also available.
Volvo Penta D1-13 cylinder head valve springs, set of 4.
These are genuine replacement OE parts suitable for the following engine codes:
UK delivery is by 1st class Royal Mail or courier. Worldwide shipping is available.
A genuine replacement part for Volvo Penta D1-13 engines.
Fits engine versions D1-13, D1-13B, D1-13F
Volvo Penta part number 861827
Shipping is by first class post or courier. Worldwide shipping is also available.
A set of quality genuine Volvo Penta D1-13 connecting rod bearings.
Standard size only
UK delivery is by Royal mail first class post or courier , European and Worldwide delivery is available.
Genuine OE fuel filter manufactured by Perkins and suitable for Volvo Penta D1-13 A, B, F engine. Choose from a 'Spin-on' filter (diameter 78 mm) or Cartridge filter (diameter 88 mm) UK shipping is by Royal Mail or courier, worldwide shipping is also...
LUCAS Magnum SAE 15W40 engine oil is ideal for Volvo Penta engines and meets or exceeds recommendations for Volvo VDS-3 oil. It is designed to last up to twice as long as plain 15W-40 oils.
Lucas say it holds much more soot in suspension than...
A genuine Perkins Connecting rod to fit Volvo Penta D1-13 engines
Top quality parts that comes with small end bush fitted and reamed to size, also included are 2 big end nuts.
UK delivery is by 1st class Royal Mail or courier,...
Excellent quaility 'spin-on' oil filters for this range of Volvo Penta D1-13 engines.
These are genuine Perkins OE parts and suitable for Volvo Penta D1-13 version.
UK shipping is by Royal Mail or courier, worldwide shipping is also available.
A genuine complete Volvo Penta D1-13 inlet silencer with air filter. Fits the following models:
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is available.
These diesel lift pumps for Volvo Penta D1-13 are very well engineered quality replacement parts and represent excellent value. This kit includes a replacement 'O' ring seal.
UK delivery is by 1st class Royal Mail or courier. European and Worldwide...
Top quality genuine oil pump for Volvo Penta D1-13, D1-13B, D1-13FUK mainland delivery is by 1st class Royal Mail or courier. European and Worldwide shipping is also available.
Quality impeller and pump service kits for the genuine Johnson engine driven raw water pump for Volvo Penta D1-13 engine. Our impellers are manufactured from the correct grade of high quality neoprene rubber and are molded on to a machined brass coupling...
Volvo Penta D1-13 exhaust outlet gasket
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
The 500FG is a quality aftermarket bulk-head mounted pre-filter. It features a turbine filtration system and is similar to the Racor 500FG. It is designed to filter various contaminants such as water, dirt, rust, and algae Turbine...
Volvo Penta D1-13 Exhaust outlet, a high quality replacement 316 stainless steel exhaust outlet that provides a long-term solution to the 'achilles heel' of theses engines, which is terminal corrosion in the original factory fitted cast iron exhaust...
An original Perkins equipment for Volvo Penta D1-13. This pump also come with a back-plate gasket and a tube of silicone sealant.
UK delivery is by Royal Mail or 24hr courier. European and worldwide shipping is available
Manufactured by Jabsco, this is the bronze sea water pump fitted to Volvo Penta D1-13 marine engines.
It fits the following versions:
*Please note that we advertise a different raw water pump for these engines, from Jabsco...
Top quality alternator and water pump belt for Volvo Penta D1-13 range. These standard belts are produced by 'Gates', the leading manufacturer of aftermarket belts.
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available
A top quality, high output, 115 amp direct replacement alternator for the Volvo Penta D1-13, D1-13B, D1-13F marine engine with 12 volt systems.
This alternator is manufactured by a Bosch Group company, world leaders in automotive charging systems.
Volvo Penta D1-13 raw water pump End Cover kit - the end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our end cover kit fits all versions of the engine...
A quality replacement thermostat kit for Volvo Penta D1-13 engines. Compatible with Volvo Penta part number 3842015. Kit includes
x1 Thermostat 90°C
x2 'O' rings
To fit, D1-13, D1-13B and D1-13F
UK delivery is by 1st...
Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...
A quality Volvo Penta split collar zinc anode for (2 blade) folding propeller. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure...
A quality universal water resistant tachometer and hour meter, ideal for use in the marine environment and manufactured exclusively for Parts4engines Ltd. This tachometer can be configured to work in conjunction with alternators, magnetic...
A high quality aftermarket replacement fuel stop solenoid for Volvo Penta D1-13 engines.
Fits versions: D1-13, D1-13b, D1-13f
Volvo part number 3584127
Delivery is by 1st class Royal Mail or courier. European and...
A quality glow plug suitable for Volvo Penta D1-13 made by NGK Japan. Easy to change and a great help to cold starting. This is a 12 volt 'Rapid glow' type - and uses full battery voltage.
Suiable for the folowing engine codes: D1-13, D1-13B, D1-13F
Volvo Penta D1-13 Heat exchanger gasket & seal kit includes:
x1 Head to exchanger gasket
x1 Exhaust outlet gasket
x2 Thermostat seals
x4 Tubestack 'O' rings
Delivery is by 1st class Royal Mail or courier. European and Worldwide shipping is...
We stock excellent quality replacement starter motor for the entire range Volvo Penta D1-13, D1-13B, D1-13F. They are manufactured by one of the Bosch group of companies. Specifications: *See the images
Voltage 12, 0.8 KW
No. of teeth 8
A quality injector nozzle for Volvo Penta D1-13 engine that have the correct type of tip fitted on this engine
The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively expensive, the...
A quality heavy duty zinc shaft and prop anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market...
A quality, strong Stainless Steel worm drive clamp ideal for both the marine environment and industrial use.
Band width 12.5mm
UK delivery is by 1st class Royal Mail, European and Worldwide delivery is available.
A quality flexible drive shaft coupling for connecting the geabox output flange to the propeller drive flange. Manufactured by R & D Marine this coupling fits Volvo Penta D1.30 engines fited with a MS2, MS10, MS15 MS25 gearboxs with 100mm...
A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details:
304 Stainless steel
Wide width provides a uniform clamping force
Nyloc nut prevents...
A comprehensive propeller shaft seal kit for the Volvo Penta 120s, 130s and 150s Saildrive, including all the parts you will need to change a leaking shaft seal. Includes:
2 x propeller shaft nitrile lip seals with stainless internal...
Engine enamel paint primer manufactured as a match for our top coat colours.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...
Engine enamel paint manufactured as a match for Volvo Penta's 'Green' marine paint and manufactured solely for Parts4Engines.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through...