A comprehensive set of quality gaskets and seals for the top end of your Volvo Penta 2003. Our set includes:
Cylinder head gasket - top quality laminated head gasket with silicon beading around water jacket areas
Rocker cover gasket. This is an...
A quality overhaul kit for your Volvo Penta 2003Our set includes:
Pistons x3 standard or +0.5mm sizes available.
Piston gudgeon Pin x3
Piston pin cir-clips x6
Piston ring sets x3
Set of Main bearings, Stsndard or -0.25mm
A comprehensive set of quality gaskets and seals for the bottom end of your Volvo Penta 2003 engine. The set includes:
Timing cover gasket
Raw water pump access plate gasket
Front and rear crankshaft lip seals
hand crank lip seal
Volvo Penta 2003 Connecting rod (used)
No longer available new from Volvo (out of production)
UK delivery is by courier. European and Worldwide delivery is available.
A quality Volvo Penta 2003 Piston Ring set.
Each set comprises
top compression ring - chrome-vanadium, parallel
second compression ring - cast, parallel
third oil control ring - chrome-vanadium, spring loaded slotted scraper.
Volvo Penta 2003 rocker cover gasket and stud seal set. The original gasket material used for the rocker cover hardens over time, resulting in an oil leak across the cylinder head top face. To solve this problem we have designed and manufactured an...
A set of quality aftermarket connecting rod bearings for your Volvo Penta 2003 engine. Available in the following sizes:
Under size -0.25mm
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is also...
Volvo Penta 2003 Cylinder head bolt set, Details:
Set includes 14 head bolts
length 100mm (measured from underneath head)
Volvo part number 970888
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
A set of cylinder head valves to fit the Volvo Penta 2003 (not 2003T). These replacement valves are made to the same material grade specifications as the OE valves and are a high quality product.
The set includes
x3 Inlet valve
Quality aftermarket replacement front and Rear engine mounts for your Volvo Penta 2003. Fitting the correct type of mount for the weight and use of your engine is crucial in not only maintaining structural safety, but also in reducing...
LUCAS Magnum SAE 15W40 engine oil is ideal for Volvo Penta engines and meets or exceeds recommendations for Volvo VDS-3 oil. It is designed to last up to twice as long as plain 15W-40 oils.
Lucas say it holds much more soot in suspension than...
A standard single spade oil pressure switch to fit a Volvo Penta 2003 that take an earth supply from the engine block. It has a tapered screw thread and single spade type electrical connection for 12v systems.
Please note* this switches...
A high quality oil filter manufactured by MANN, suitable for Volvo Penta 2003 engine version.
UK delivery by 1st class Royal Mail or courier. European and Worldwide shipping is also available.
The 500FG is a quality aftermarket bulkhead mounted pre-filter. It features a turbine filtration system and is similar to the Racor 500FG. It is designed to filter various contaminants such as water, dirt, rust, and algae
Turbine filters are...
A fully reconditioned Volvo Penta 2003 fuel injector with new nozzle.
Injector type - Bosch KBAL 65 P 9/4.
How to purchase, please add this product to the cart and complete your purchase. Your exchange injector...
A quality nozzles manufactured by Bosch for your Volvo Penta 2003 engine.
The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively expensive, the alternative option of reconditioning your existing injectors...
A genuine Volvo Penta 2003 water pipe, (new old stock) connects the cylinder head to the fresh water pump. Fits the following engine versions:
2003, 2003B, 2003D, 2003AG, 2003BG
Volvo part number 840739
UK delivery is by Royal...
A genuine Volvo Penta 2003 expansion tank Pressure Cap.
Fits 2003, 2003B, 2003AG, 2003BG and 2002D
Volvo Penta part number 844624
Rated at 30 kPa
UK delivery is by 1st class post or courier, European and Worldwide delivery is also...
Volvo Penta 2003 Injector pump shim kit. This shim kit contains both 'hard and soft' shims which can be configured to create the following sizes.
UK delivery is by 1st class Royal Mail...
A high quality 316 stainless steel exhaust outlet for the Volvo Penta 2003 that provides a long-term solution to the 'achilles heel' of these engines, which is terminal corrosion in the original factory fitted cast iron exhaust outlet.
These are high quality aftermarket pump manufactured in Europe. They are very well engineered and are excellent value.
There are two types of lift pump now available for the Volvo Penta 2003. You can choose from either the earlier (unsealed) or the...
A genuine Volvo Penta 2003 water pipe, (new old stock) connects the raw water pump to the heat exchanger. Fits the following engine versions:
2003, 2003B, 2003D, 2003AG, 2003BG
Volvo part number 840724
UK delivery is by Royal mail...
Volvo Penta 2003 water pipe seal and fuel washer kits. A range of kits which include all the washers and seals you are going to need to overhaul the water or fuel pipe system on this popularversion of the 2000 series of engines and supplied in a handy...
We stock primary and secondary fuel filters for the Volvo Penta 2003 engine. The primary filter is usually bulkhead mounted between the tank and the engine, whilst the secondary filter is located at the front of the engine. Primary filter- A 'cartridge'...
Genuine VDO Volvo Penta 2003 Thermo Monitor, details (new old stock):
Volvo Penta part number 858229
Opening temperature 95°
Fits engine versions 2003, 2003B, 2003D, 2003AG, 2003BG , 2003 SOLAS, 2003B SOLAS
UK delivery is by...
A quality aftermarket Volvo Penta 2003 Thermostat with seal: We have two options available:
Direct cooled engines 60°C / 62°C Volvo Part number 877355
Freash cooled engines 74°C Volvo Part number...
Volvo Penta 2003 exhaust outlet gasket, a quality UK hand cut gasket.
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is also available.
With a new Volvo Penta 2003 coolant circulation pump (OE part #860358 or #23401753) being prohibitavely expensive at over £500, we have put into manufacture a repair kit that includes all the parts you will need to overhaul your existing pump.
Excellent quality Raw water pump kits for the original engine driven raw water pump on Volvo Penta 2003 engine. Our kits include impellers that are manufactured from the correct grade of high quality neoprene rubber and are moulded on to a machined brass...
Top quality alternator and water pump belts which are the correct fitment for Volvo Penta 2003 marine engines. The belts are produced by 'Gates', the leading manufacturer of aftermarket belts.
Please choose from the options above to get the correct belt...
Volvo Penta 2003 Exhaust outlet and riser. This is a high quality replacement 316 stainless steel precision CNC machined cast exhaust outlet with riser that provides a long-term solution to the 'Achilles heel' of theses engines, which...
Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...
Volvo Penta 2003 heat exchanger service kit. We recommend regular servicing of the heat exchanger to avoid overheating problems caused by blockages from limescale build up and broken up impeller blades.
Our service kit fits the following fresh water...
High quality JOHNSON Raw water pump (seawater), a genuine replacement part suitable for Volvo Penta 2003
x1 Raw water pump
x1 Pump to engine sealing 'O' ring
x2 water pipe seals
UK shipping is by courier, European...
Volvo Penta raw water pump end cover kit for Volvo Penta 2003 engine
The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our overhaul kit fits all versions...
A top quality aftermarket Volvo Penta Alternator (pulley not included), 12 volt, 70 amp, 'isolated earth', direct replacement alternator to fit the Volvo Penta 2003 engine. We include in the kit a packet of the correct electrical spade connectors...
A genuine Volvo Penta 2003 standard instrument panel to fit the following engine versions:
2003 2003B and 2003D
Two options are available:
Panel for use with a push start button Volvo part number 872798 or
Panel for use with a...
A pair of quality Volvo Penta zinc plate anodes for folding propeller. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection...
Volvo Penta 2003 Starter Motor relay
Made in Austria
Comes with optional mounting bracket
UK mainland delivery is by 1st class Royal Mail or courier. European and Worldwide shipping are also available.
A quality aftermarket rubber hull mounting cover for Volvo Penta 110S, 120S and MS25S saildrive's.
Equivalent to Volvo Penta part 854932
Suitable for the following types of saildrive.
S120C, 120SB, 120S-E , 120S-D,
A genuine Volvo Penta Rubber Diaphragm Seal and gasket kit for 110S 120S 130S 150S and MS25S.
Volvo part number 21389074
Fits 110S, 120S, 130S, 150S and MS25S sail drives
UK delivery is by courier, Worldwide shipping is also...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this split ring zinc anode kit fits the full range of Volvo Penta 120 Saildrive...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this zinc anode fits the full range of Volvo Penta 120 Saildrive units...
A quality universal water resistant tachometer and hour meter, ideal for use in the marine environment and manufactured exclusively for Parts4engines Ltd. This tachometer can be configured to work in conjunction with alternators, magnetic...
A quality Volvo Penta 2000 series zinc pencil anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market...
Volvo Penta starter motor for Volvo Penta 2003 engine version. This is a quality product manufactured by a Bosch group company.
Voltage 12, 1.4 kW
Mount. flange 82.50mm
Drive distance 34.00mm
Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use.
Band width 12.5mm
Band diameter given in the options above is the 'maximum'.
UK delivery is by 1st class Royal Mail,...
A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details:
304 Stainless steel
Wide width provides a uniform clamping force
Nyloc nut prevents...
A quality heavy duty zinc shaft anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market.
This shaft anode...
A comprehensive propeller shaft seal kit for the Volvo Penta 120s, 130s, 150s and MS25S Saildrive, including all the parts you will need to change a leaking shaft seal. Includes:
2 x propeller shaft nitrile lip seals with stainless...
Engine enamel paint primer manufactured as a match for our top coat colours.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...
Engine enamel paint manufactured as a match for Volvo Penta's 'Green' marine paint and manufactured solely for Parts4Engines.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through...