A comprehensive set of quality gaskets and seals for the bottom end of your Volvo Penta 2001 engine. The set includes:
Timing cover gasket
Raw water pump access plate gasket
Front and rear crankshaft lip seals
hand crank lip seal
Tube J-B Weld...
A top quality aftermarket piston with rings for your Volvo Penta 2001 engine. Includes the Gudgeon pin (wrist pin ) and two circlips. Available in the following sizes:
UK delivery is by 1st class Royal Mail...
A quality Volvo Penta 2001 Piston Ring set.
Each set comprises
top compression ring - chrome-vanadium, parallel
second compression ring - cast, parallel
third oil control ring - chrome-vanadium, spring loaded slotted scraper.
These rings are...
A set of quality aftermarket connecting rod bearings for your Volvo Penta 2001 engine. Available in the following sizes:
Under size -0.25mm
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is also...
Volvo Penta 2001 Cylinder head bolt set, Details:
Set includes 6 head bolts
length 100mm (measured from underneath head)
Volvo part number 970888
UK delivery is by 1st class Royal Mail. European and Worldwide delivery is available.
A pair of cylinder head valves to fit all Volvo Penta 2001 engines, set includes
x1 Inlet valve
x1 Exhaust valve
UK delivery is by Royal mail first class post or courier, European and Worldwide delivery is available.
Quality replacement Front and rear engine mounts for your Volvo Penta 2001. Fitting the correct type of mount for the weight and use of your engine is crucial in not only maintaining structural safety, but also in reducing to a minimum the...
LUCAS Magnum SAE 15W40 engine oil is ideal for Volvo Penta engines and meets or exceeds recommendations for Volvo VDS-3 oil. It is designed to last up to twice as long as plain 15W-40 oils.
Lucas say it holds much more soot in suspension than...
A high quality oil filter manufactured by MANN, suitable for Volvo Penta 2001 engine version.
UK delivery by 1st class Royal Mail or courier. European and Worldwide shipping is also available.
A standard single spade oil pressure switch to fit a Volvo Penta 2001 that take an earth supply from the engine block. It has a tapered screw thread and single spade type electrical connection for 12v systems.
Please note* this switches...
The 500FG is a quality aftermarket bulkhead mounted pre-filter. It features a turbine filtration system and is similar to the Racor 500FG. It is designed to filter various contaminants such as water, dirt, rust, and algae
Turbine filters are...
A fully reconditioned Volvo Penta 2001 fuel injector with new nozzle.
Injector type - Bosch KBAL 65 P 9/4.
How to purchase: please add this product to the cart and complete your purchase. Your exchange injector should...
A quality nozzles manufactured by Bosch for your Volvo Penta 2001 engine.
The nozzle is the only wearing part of the injector and with new injectors becoming prohibitively expensive, the alternative option of reconditioning your existing injectors...
These are high quality aftermarket pump manufactured in Europe. They are very well engineered and are excellent value.
There are two types of lift pump now available for the Volvo Penta 2001. You can choose from either the earlier (unsealed) or the...
Volvo Penta 2001 Injector pump shim kit. This shim kit contains both 'hard and soft' shims which can be configured to create the following sizes.
UK delivery is by 1st class Royal...
Volvo Penta 2001 water pipe seal and fuel washer kits. A range of kits which include all the washers and seals you are going to need to overhaul the water or fuel pipe system on this popular engine and supplied in a handy storage box. Well worth keeping...
We stock primary and secondary fuel filters for the Volvo Penta 2001 engine. The primary filter is usually bulkhead mounted between the tank and the engine, whilst the secondary filter is located at the front of the engine. Primary filter- A 'cartridge'...
Genuine VDO Volvo Penta 2001 Thermo Monitor, details (new old stock):
Volvo Penta part number 858229
Opening temperature 95°
Fits engine versions 2001, 2001B, 2001AG, 2001BG
UK delivery is by 24 hour courier. European and Worldwide...
A quality aftermarket Volvo Penta 2001 Thermostat with seal: We have two options available:
Direct cooled engines 60°C / 62°C Volvo Part number 877355
Freash cooled engines 74°C Volvo Part number...
Volvo Penta 2001 exhaust outlet gasket, a quality UK hand cut gasket.
UK delivery is by 1st class Royal Mail or courier. European and Worldwide delivery is also available.
Top quality alternator and water pump belts which are the correct fitment for Volvo Penta 2001 marine engines. The belts are produced by 'Gates', the leading manufacturer of aftermarket belts.
UK delivery is by 1st class Royal Mail. European and...
Excellent quality Raw water pump kits for the original engine driven raw water pump on Volvo Penta 2001 engine. Our kits include impellers that are manufactured from the correct grade of high quality neoprene rubber and are moulded on to a machined...
A high quality Volvo Penta 2001 stainless steel Exhaust pipe outlet elbow replacement.
Precision CNC machined cast
316 stainless steel
Water inlet pipe diameter ¾” (19mm)
Exhaust outlet diameter 1 ¾” (44...
Volvo Penta 2001 Exhaust outlet and riser. This is a high quality replacement 316 stainless steel precision CNC machined cast exhaust outlet with riser that provides a long-term solution to the 'Achilles heel' of theses engines, which is...
Rydlyme Marine is a safe, biodegradable marine descaler developed to dissolve problematic fouling mediums including calcium, rust, mussels, barnacles, tiger shells and other scale formed mineral deposits that hinder the performance of vital water systems...
High quality JOHNSON Raw water pump, a genuine replacement part suitable for Volvo Penta 2001
x1 Raw water pump
x1 Pump to engine sealing 'O' ring
x2 water pipe seals
UK shipping is by courier, European and Worldwide...
Volvo Penta raw water pump end cover kit for Volvo Penta 2001 engine
The end covers on these pumps tend to wear, resulting in poor sealing of the impeller, lower flow rates and premature failure of the impeller vanes. Our overhaul kit fits all versions...
A top quality Volvo Penta Alternator (pulley not included), 12 volt, 70 amp, 'isolated earth', direct replacement alternator to fit the Volvo Penta 2001 engine. We include in the kit a packet of the correct electrical spade connectors and also a wiring...
A genuine Volvo Penta 2001 standard instrument panel to fit the following engine versions:
2001 and 2001B
Two options are available:
Panel for use with a push start button Volvo part number 872798 or
Panel for use with a key...
A pair of quality Volvo Penta zinc plate anodes for folding propeller. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection...
Volvo Penta 2001 Starter Motor relay
Made in Austria
Comes with optional mounting bracket
UK mainland delivery is by 1st class Royal Mail or courier. European and Worldwide shipping are also available.
A quality aftermarket rubber hull mounting cover for Volvo Penta 110S, 120S and MS25S saildrive's.
Equivalent to Volvo Penta part 854932
Suitable for the following types of saildrive.
S120C, 120SB, 120S-E , 120S-D,
A quality universal water resistant tachometer and hour meter, ideal for use in the marine environment and manufactured exclusively for Parts4engines Ltd. This tachometer can be configured to work in conjunction with alternators, magnetic...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this split ring zinc anode kit fits the full range of Volvo Penta 120 Saildrive...
Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market, this zinc anode fits the full range of Volvo Penta 120 Saildrive units...
A genuine Volvo Penta Rubber Diaphragm Seal and gasket kit for 110S 120S 130S 150S and MS25S.
Volvo part number 21389074
Fits 110S, 120S, 130S, 150S and MS25S sail drives
UK delivery is by courier, Worldwide shipping is also...
Volvo Penta 2001 starter motor. This is a quality product manufactured by a Bosch group company.
Voltage 12, 1.4 kW
Mount. flange 82.50mm
Drive distance 34.00mm
Total length: 242.00...
A quality Volvo Penta 2000 series zinc pencil anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market...
Strong, good quality Stainless Steel (304 grade) worm drive clamps ideal for both the marine environment and industrial use.
Band width 12.5mm
Band diameter given in the options above is the 'maximum'.
UK delivery is by 1st class Royal Mail,...
A pair of Stainless Steel T-bolt clamps with a fixed bridge, ideal for securing an exhaust hose to the heat exchange outlet on marine engines. Product details:
304 Stainless steel
Wide width provides a uniform clamping force
Nyloc nut prevents...
A quality heavy duty zinc shaft anode. Manufactured to US military specification by Tecnoseal in Italy, one of the worlds leading suppliers of sacrificial anodes for cathodic protection in the leisure boat market.
This shaft anode...
A comprehensive propeller shaft seal kit for the Volvo Penta 120s, 130s, 150s and MS25S Saildrive, including all the parts you will need to change a leaking shaft seal. Includes:
2 x propeller shaft nitrile lip seals with stainless...
Engine enamel paint primer manufactured as a match for our top coat colours.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through drying even in thick films and...
Engine enamel paint manufactured as a match for Volvo Penta's 'Green' marine paint and manufactured solely for Parts4Engines.
This is a high quality, '2 hour' drying time one-part Synthetic Alkyd Enamel. It offers fast surface drying, good through...